Re: Segmentation fault with X.org and Coral-P drivers

Dear Matthias,

in message [ref] you wrote:

I have been trying to get X.org running on a board called "Embedded
Planet EP5200C" (it seems to be a "Freescale Lite5200") and a Fujitsu

Umm... no. Embedded Plaet and Freescale are two different  companies,
and EP5200 and Lite5200 are two different boards.

Coral-P (Rev 5.0). I am using the 2.4 kernel from denx.de and

Our kernel does not include any support for the EP5200 board.

succesfully installed gentoo-ppc on nfs. The framebuffer works, I get
a login prompt on the monitor.

Now I compiled x.org-6.8.2 (gentoo -r4) and the mb86290 driver from
denx.de. Unfortunately, it does not work and I get a segmentation
fault when trying to startx. strace produces the output attached
below.

Please read the documentation that comes with the driver:
ftp://ftp.denx.de/pub/fujitsu/Coral-P/README.html

Note that the driver was  built  and  tested  against  xfree86-4.3.0;
don't  expect  the  binary  to  work  in  a  completely different X11
release. You wil have to rebuild (and eventually  adapt)  the  driver
for your environment.

Feel free to contact me if you need help.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
What can it profit a man to gain the whole world and to come  to  his
property with a gastric ulcer, a blown prostate, and bifocals?
                                     -- John Steinbeck, _Cannery Row_