Re: Need help for Linux hangs

jimmy liu wrote:

I have U-Boot running on a board similar to
MPC8260ADS.
bootargs=root=/dev/ram rw console=ttyS0,115200

try to set console=ttyCPM0,115200 in the bootargs.

When I run command: bootm ff060000 ff260000, the
prompt shows message:
## Booting image at ff060000 ...
   Image Name:   Linux-2.4.25
   Image Type:   PowerPC Linux Kernel Image (gzip
compressed)
   Data Size:    621131 Bytes = 606.6 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at ff260000 ...
   Image Name:   Simple Embedded Linux Framework
   Image Type:   PowerPC Linux RAMDisk Image (gzip
compressed)
   Data Size:    1591658 Bytes = 1.5 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Ramdisk to 00e07000, end 00f8b96a ... OK

The system hangs here. I have checked in the FAQs
provided in the Denx's site, could not find the
similar case.

I would appreciate any help.

Thanks & Regards,

Jimmy


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

-- 
Sincerely, Vitaly