Re: Video Card to Lite5200

Hi Denx,

I still doing some tests with ATI Video cards, as I said before the card
work fine on my PC.

I compiled the 2.6.14 kernel to Lite5200 with /proc/pci support, then when I
execute:

/ # cat /proc/pci
PCI devices found:
  Bus  0, device  26, function  0:
    Class 0680: PCI device 1057:5803 (rev 0).
      Master Capable.  Latency=248.
      Non-prefetchable 32 bit memory at 0xa0000000 [0xa003ffff].
/ #

It don't list the card placed at PCI slot, on PC using "lspci -v" I see:

0000:00:0c.0 VGA compatible controller: ATI Technologies Inc Rage Mobility
P/M (rev 64) (prog-if 00 [VGA])
        Subsystem: 1002:4c52
        Flags: bus master, stepping, medium devsel, latency 32, IRQ 10
        Memory at ed000000 (32-bit, non-prefetchable) [size=16M]
        I/O ports at d800 [size=256]
        Memory at ec800000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at 20000000 [disabled] [size=128K]
        Capabilities: [5c] Power Management version 1

What you think?
Is it normal Linux on Lite5200 don't show the PCI card info?

I am looking for an "ATI Rage XL Xpert98" because Linux kernel has support
to initialize it without BIOS help (CONFIG_FB_ATY_XL_INIT).
I see some post at some list from people using this board on no x86
platform.

Cheers,

Alan