RE: Xilinx_uartlite

Hi Tom,

Thanks for your reply, but then I only get:
	Now booting the kernel

Beste regards,

Jaap

-----Oorspronkelijk bericht-----
Van: T Ziomek [mailto:ctz001@email.mot.com]=20
Verzonden: donderdag 1 december 2005 02:06
Aan: Jaap de Jong; linuxppc-embedded
Onderwerp: Re: Xilinx_uartlite

I'm trying to get my avnet virtex4fx12 running with linux.
It boots, but ends with:
        Warning: unable to open an initial console.
This means /dev/console was not opened; init is running.
Since my board has no 16550 uart I must use xilinx_uartlite Part of my

configuration:
        +--Character devices
                +--Xilinx UART Lite                     ON
                +--Console on UART Lite port            ON
Any ideas?

/dev/console may not be tied to your UARTLite.  If you don't specify the
console on your kernel command line, try adding something along the
lines of "console=3DttyS0,19200" to it (with the appropriate device and
baud rate of course).

Tom
--=20
   /"\  ASCII Ribbon Campaign   |
   \ /                          |   Email to user 'CTZ001'
    X        Against HTML       |             at 'email.mot.com'
   / \     in e-mail & news     |