Re: Xilinx_uartlite

I'm trying to get my avnet virtex4fx12 running with linux.
It boots, but ends with:
        Warning: unable to open an initial console.
This means /dev/console was not opened; init is running.
Since my board has no 16550 uart I must use xilinx_uartlite
Part of my configuration:
        +--Character devices
                +--Xilinx UART Lite                     ON
                +--Console on UART Lite port            ON
Any ideas?

/dev/console may not be tied to your UARTLite.  If you don't specify the
console on your kernel command line, try adding something along the lines
of "console=ttyS0,19200" to it (with the appropriate device and baud rate
of course).

Tom
-- 
  /"\  ASCII Ribbon Campaign   |
  \ /                          |   Email to user 'CTZ001'
   X        Against HTML       |             at 'email.mot.com'
  / \     in e-mail & news     |