October 2005

588 messages across 286 threads. The 100 most recently active threads.

Last	Thread	Replies
Monday 31 October
21:24	[PATCH 2.6.14-rc5 1/1] : mv643xx_eth_pcidev - implements hotplug for the marvell gige functionality by probing the northbridge pci id. Sven Luther	9
21:13	enabling/disabling CPUs Kconfig bug Giuliano Pochini	none
16:56	Re: use of phy_connect() in drivers/net/gianfar.c ? Wolfgang Denk	2
16:46	[PATCH] PPC: Basic enablement for new 15" PowerBook Olof Johansson	1
15:30	Kernel 2.6 on MPC8xx performance trouble... David Jander	8
15:05	Re: [PATCH] ppc32: Add missing initrd header on ppc440 Matt Porter	none
14:29	NFS can not mount (linuxppc2.2.4 mpc5200 lxt971) ÏÄÓê	2
13:29	audit_sysctl_exit can only be used with CONF_AUDIT_SYSCTL Horms	none
12:21	ayuda Doug Carrillo	2
11:29	[PATCH] ppc32: fix: swallowed chars when booting. Heiko Schocher	none
11:13	[PATCH] ppc32: Fix SCC Uart write problem after 2. open() Heiko Schocher	none
09:59	30 bits DMA and ppc Benjamin Herrenschmidt	10
09:31	Re: Kernel 2.6 on MPC8xx performance trouble... Wolfgang Denk	1
09:29	Re: PPC4xx cleanup Matt Porter	2
06:47	Problem Regarding Ping in Linux kernel version 2.4.24 apoorv sangal	13
05:12	Re: compact flash driver mcr	none
05:12	Re: about HDLC Ethernet Driver mcr	none
04:23	please pull the powerpc-merge.git tree Paul Mackerras	none
00:11	PowerPC PVR version bug (G4 etc.) Matt Sealey	none
Sunday 30 October
21:17	[PATCH 2.6.14] mm: 8xx MM fix for Pantelis Antoniou	1
13:59	fcc_enet multicast support. Wartan Hachaturow	none
00:38	use of phy_connect() in drivers/net/gianfar.c ? Wolfgang Denk	1
Saturday 29 October
22:07	[PATCH 1/3] PPC 44x EMAC driver: add 440SPe support Eugene Surovegin	1
19:47	[PATCH 3/3] PPC 4xx EMAC driver: fix VSC8201 PHY initialization Eugene Surovegin	none
19:45	[PATCH 2/3] PPC 44x EMAC driver: add 440GR support Eugene Surovegin	none
12:55	Patches for 2.6.15 Paul Mackerras	10
06:29	[patch 38/43] Various powerpc 32bit ppc64 build fixes unknown sender	2
05:59	Re: Patches for 2.6.15 Matt Porter	6
03:24	[patch 13/43] Add MAINTAINER entry for the new PowerPC 4xx on-chip ethernet controller driver unknown sender	2
00:46	[patch 43/43] ppc64 memory model depends on NUMA unknown sender	none
00:46	[patch 42/43] ppc64: remove duplicate local variable in set_preferred_console unknown sender	none
00:46	[patch 41/43] ppc64: change name of target file during make install unknown sender	none
00:46	[patch 40/43] ppc64: reenable make install with defconfig unknown sender	none
00:46	[patch 39/43] ppc64: compile nls_cp437 and nls_iso8859_1 into the kernel in defconfig unknown sender	none
00:46	[patch 37/43] ppc64: make dma_addr_t 64 bits unknown sender REVIEWED: 1 (0M)	none
00:46	[patch 36/43] ppc64: AC Power handling broken for desktops unknown sender	none
00:46	[patch 35/43] ppc64 boot: print firmware provided stackpointer unknown sender	none
00:46	[patch 34/43] ppc64 boot: proof that reloc works unknown sender	none
00:46	[patch 33/43] ppc64 boot: make the zImage relocateable unknown sender	none
00:46	[patch 32/43] ppc64 boot: remove global initializers unknown sender	none
00:46	[patch 31/43] ppc64 boot: fix typo in asm comments unknown sender	none
00:46	[patch 30/43] ppc64 boot: use memset to clear bss unknown sender	none
00:46	[patch 29/43] ppc64 boot: cleanup linker script unknown sender	none
00:46	[patch 28/43] ppc64 boot: bootfiles depend on linker script unknown sender	none
00:46	[patch 27/43] ppc64 boot: move gunzip function before use unknown sender	none
00:46	[patch 26/43] ppc64 boot: remove need for imagesize.c unknown sender	none
00:46	[patch 25/43] ppc64 boot: remove zlib unknown sender	none
00:46	[patch 23/43] ppc64 boot: remove include from include/linux/zutil.h unknown sender	none
00:46	[patch 24/43] ppc64 boot: missing include for size_t unknown sender	none
00:46	[patch 22/43] ppc64 boot: remove include from lib/zlib_inflate/inflate.c unknown sender	none
00:46	[patch 21/43] ppc64: Thermal control for SMU based machines unknown sender	none
00:46	[patch 20/43] ppc64: Support retreiving missing SMU partitions unknown sender	none
00:46	[patch 19/43] ppc64: Add cpufreq support for SMU based G5 unknown sender	none
00:46	[patch 18/43] mv643xx_eth_pcidev: implement hotplug for the marvell gige functionality by probing the northbridge pci id unknown sender	none
00:46	[patch 17/43] mv643xx_eth_showsram: Added information message when using the SRAM unknown sender	none
00:46	[patch 16/43] ppc32: ppc_sys fixes for 8xx and 82xx unknown sender	none
00:46	[patch 15/43] ppc32: 85xx PHY Platform Update unknown sender	none
00:46	[patch 14/43] chrp_pegasos_eth: Added Marvell Discovery II SRAM support unknown sender	none
00:46	[patch 12/43] New PowerPC 4xx on-chip ethernet controller driver unknown sender	none
00:46	[patch 11/43] Add modalias for pmac network drivers unknown sender REVIEWED: 1 (1M)	none
00:46	[patch 10/43] Add modalias to macio sysfs attributes unknown sender REVIEWED: 1 (1M)	none
00:46	[patch 09/43] ppc32: nvram driver for chrp unknown sender	none
00:46	[patch 08/43] ppc: make phys_mem_access_prot() work with pfns instead of addresses unknown sender	none
00:46	[patch 07/43] ppc32: update xmon help text unknown sender	none
00:46	[patch 06/43] ppc32: handle access to non-present IO ports on 8xx unknown sender	none
00:46	[patch 05/43] ppc32: #ifdef out ALTIVEC specific code in __switch_to unknown sender	none
00:46	[patch 04/43] ppc32: Cleanup AMCC PPC44x eval board U-Boot support unknown sender	none
00:46	[patch 03/43] MPC8xx PCMCIA driver unknown sender	none
00:46	[patch 02/43] ppc32 8xx: use io accessor macros instead of direct memory reference unknown sender	none
00:46	[patch 01/43] ppc: prevent GCC 4 from generating AltiVec instructions in kernel unknown sender	none
00:02	Re: PPC32 - No IDE/ATA devices on new PowerBook Benjamin Herrenschmidt	none
Friday 28 October
22:39	How the linux use BAT Noah yan	3
21:43	memcpy for unaligned memory regions Olaf Hering	none
20:51	Re: Howto Cross Compile GCC to run on PPC Platform Wolfgang Denk	none
20:46	MPC8xx support in 2.6 and [PATCH] USB host controller selection... David Jander	3
20:42	RE: Howto Cross Compile GCC to run on PPC Platform Steven Blakeslee	3
19:23	Howto Cross Compile GCC to run on PPC Platform Jeff Stevens	1
18:22	Makefile check for older binutils broken? Marcelo Tosatti	6
07:42	SMP Design Suresh Chandra Mannava	none
Thursday 27 October
21:08	Re: MPC8xx support in 2.6 and [PATCH] USB host controller selection... Wolfgang Denk	none
20:47	Board based on MPC7447 and MV64462 Ashish Bijlani	7
14:36	Re: MPC8xx support in 2.6 and [PATCH] USB host controller selection... Wolfgang Denk	1
13:54	[PATCH][UPDATED] powerpc: only build idle_6xx for 6xx Kumar Gala	none
13:45	[PATCH] powerpc: only build idle_6xx for 6xx Kumar Gala	2
07:04	about HDLC Ethernet Driver 徐小威的EMAIL	none
Wednesday 26 October
20:01	[PATCH] ppc_sys: do not BUG if system ID is unknown Marcelo Tosatti	none
14:56	[PATCH] powerpc: Moved dcr support to arch/powerpc Kumar Gala	none
14:55	[PATCH] powerpc: Fix warning related to do_dabr Kumar Gala	none
08:59	compact flash driver Bizhan Gholikhamseh (bgholikh)	1
07:35	Re: [PATCH] ppc32: ppc_sys fixes for 8xx and 82xx (whitespaces fixed) unknown sender	none
05:27	[PATCH] ppc32: Fix warnings due to use of seq_file Kumar Gala	none
04:57	[PATCH] powerpc: Some minor cleanups to setup_32.c Kumar Gala	none
04:02	[PATCH] powerpc: Add support for Book-E timer config to generic_calibrate_decr Kumar Gala	none
Tuesday 25 October
18:31	Development for Motorola MPC850DSL Shakthi Kannan	none
18:30	[PATCH 2.6.14-rc5 1/1] : mv643xx_eth_showsram: Added information message when using the SRAM Nicolas DET	2
08:51	m82xxhci USB driver problems Alex Zeffertt	2
07:33	[PATCH] Ethtool support for the new PowerPC 4xx on-chip ethernet controller driver Eugene Surovegin	1
06:59	[PATCH 1/2] ppc64: make dma_addr_t 64 bits Stephen Rothwell	1
Monday 24 October
22:03	[PATCH] 85xx PHY Platform Update info	2
20:28	Virtual Machine Exit on eclipse startup Juan P. Holder	none

`h`	back out one level
`j`	next message in thread / next series-diff position
`k`	previous message in thread / previous series-diff position
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help