Re: Slow read performance of NAND flash on PPC 405EP

Andy Hawkins wrote:

Hi,

We have a custom PPC-405EP based board, with a Samsumg 8Gbit flash
(K9W8G08U1M) attached via EBC bank 2. When we read from this flash, we are
only getting data rates of around 20 MBits/sec (this is using 'dd' to read
direct from the linux /dev/mtd/x device). Our estimates show that the device
should be capable of something like 100 MBits/sec.

Ops, pardon, you are not going to use JFFS2 :-) Ignore that mail then :-)

-- 
Best Regards,
Artem B. Bityuckiy,
St.-Petersburg, Russia.