AW: emac driver broken in 2.6.12.2 ?

Message>> emac: IBM EMAC Ethernet driver, version 2.0

quoted

Maintained by Benjamin Herrenschmidt [off-list ref]
eth0: IBM ema c, MAC 00:00:00:00:00:00
eth0: Found Generic MII PHY (0x00)
eth1: IBM emac, MAC 00:00:00:00:00:00
eth1: Found Generic MII PHY (0x01)

Are you sure that you?ve configured your ethernet driver? There is no MAC
address defined. And the PHY address is really located at 0x0 or 0x1? If not
you have also to configure the offset from which address the PHY routine
start in your board specific files like for OCOTEA reference board in
linux-2.6.12/arch/ppc/platforms/4xx/ocotea.c

Best regards,

David