[PATCH]: Gianfar PHY Platform update

Message details and related content

Open message details and related content

This patch provides the infrastructure needed by the gianfar driver to 
create an MDIO bus, and connect to it.

Signed-off-by: Andy Fleming <redacted>

diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c
--- a/arch/ppc/platforms/85xx/mpc8540_ads.c
+++ b/arch/ppc/platforms/85xx/mpc8540_ads.c

@@ -53,6 +53,10 @@
 
 #include <syslib/ppc85xx_setup.h>
 
+static const char *GFAR_PHY_0 = "phy0:0";
+static const char *GFAR_PHY_1 = "phy0:1";
+static const char *GFAR_PHY_3 = "phy0:3";
+
 /* ************************************************************************
  *
  * Setup the architecture

@@ -64,6 +68,7 @@ mpc8540ads_setup_arch(void)
 	bd_t *binfo = (bd_t *) __res;
 	unsigned int freq;
 	struct gianfar_platform_data *pdata;
+	struct gianfar_mdio_data *mdata;
 
 	/* get the core frequency */
 	freq = binfo->bi_intfreq;

@@ -90,34 +95,35 @@ mpc8540ads_setup_arch(void)
 	invalidate_tlbcam_entry(num_tlbcam_entries - 1);
 #endif
 
+	/* setup the board related info for the MDIO bus */
+	mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
+
+	mdata->irq[0] = MPC85xx_IRQ_EXT5;
+	mdata->irq[1] = MPC85xx_IRQ_EXT5;
+	mdata->irq[2] = -1;
+	mdata->irq[3] = MPC85xx_IRQ_EXT5;
+	mdata->irq[31] = -1;
+	mdata->paddr += binfo->bi_immr_base;
+
 	/* setup the board related information for the enet controllers */
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-		pdata->phyid = 0;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_0;
 		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
 	}
 
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-		pdata->phyid = 1;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_1;
 		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
 	}
 
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC);
 	if (pdata) {
 		pdata->board_flags = 0;
-		pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-		pdata->phyid = 3;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_3;
 		memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6);
 	}

diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c
--- a/arch/ppc/platforms/85xx/mpc8560_ads.c
+++ b/arch/ppc/platforms/85xx/mpc8560_ads.c

@@ -57,6 +57,10 @@
 #include <syslib/ppc85xx_setup.h>
 
 
+static const char *GFAR_PHY_0 = "phy0:0";
+static const char *GFAR_PHY_1 = "phy0:1";
+static const char *GFAR_PHY_3 = "phy0:3";
+
 /* ************************************************************************
  *
  * Setup the architecture

@@ -69,6 +73,7 @@ mpc8560ads_setup_arch(void)
 	bd_t *binfo = (bd_t *) __res;
 	unsigned int freq;
 	struct gianfar_platform_data *pdata;
+	struct gianfar_mdio_data *mdata;
 
 	cpm2_reset();

@@ -87,24 +92,28 @@ mpc8560ads_setup_arch(void)
 	mpc85xx_setup_hose();
 #endif
 
+	/* setup the board related info for the MDIO bus */
+	mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
+
+	mdata->irq[0] = MPC85xx_IRQ_EXT5;
+	mdata->irq[1] = MPC85xx_IRQ_EXT5;
+	mdata->irq[2] = -1;
+	mdata->irq[3] = MPC85xx_IRQ_EXT5;
+	mdata->irq[31] = -1;
+	mdata->paddr += binfo->bi_immr_base;
+
 	/* setup the board related information for the enet controllers */
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-		pdata->phyid = 0;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_0;
 		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
 	}
 
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-		pdata->phyid = 1;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_1;
 		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
 	}

diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
--- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
+++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c

@@ -395,6 +395,9 @@ mpc85xx_cds_pcibios_fixup(void)
 
 TODC_ALLOC();
 
+static const char *GFAR_PHY_0 = "phy0:0";
+static const char *GFAR_PHY_1 = "phy0:1";
+
 /* ************************************************************************
  *
  * Setup the architecture

@@ -406,6 +409,7 @@ mpc85xx_cds_setup_arch(void)
 	bd_t *binfo = (bd_t *) __res;
 	unsigned int freq;
 	struct gianfar_platform_data *pdata;
+	struct gianfar_mdio_data *mdata;
 
 	/* get the core frequency */
 	freq = binfo->bi_intfreq;

@@ -449,44 +453,42 @@ mpc85xx_cds_setup_arch(void)
 	invalidate_tlbcam_entry(num_tlbcam_entries - 1);
 #endif
 
+	/* setup the board related info for the MDIO bus */
+	mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
+
+	mdata->irq[0] = MPC85xx_IRQ_EXT5;
+	mdata->irq[1] = MPC85xx_IRQ_EXT5;
+	mdata->irq[2] = -1;
+	mdata->irq[3] = -1;
+	mdata->irq[31] = -1;
+	mdata->paddr += binfo->bi_immr_base;
+
 	/* setup the board related information for the enet controllers */
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-		pdata->phyid = 0;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_0;
 		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
 	}
 
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-		pdata->phyid = 1;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_1;
 		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
 	}
 
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC1);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-		pdata->phyid = 0;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_0;
 		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
 	}
 
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC2);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-		pdata->phyid = 1;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_1;
 		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
 	}

diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c
--- a/arch/ppc/platforms/85xx/sbc8560.c
+++ b/arch/ppc/platforms/85xx/sbc8560.c

@@ -92,6 +92,9 @@ sbc8560_early_serial_map(void)
 }
 #endif
 
+static const char *GFAR_PHY_25 = "phy0:25";
+static const char *GFAR_PHY_26 = "phy0:26";
+
 /* ************************************************************************
  *
  * Setup the architecture

@@ -103,6 +106,7 @@ sbc8560_setup_arch(void)
 	bd_t *binfo = (bd_t *) __res;
 	unsigned int freq;
 	struct gianfar_platform_data *pdata;
+	struct gianfar_mdio_data *mdata;
 
 	/* get the core frequency */
 	freq = binfo->bi_intfreq;

@@ -127,24 +131,26 @@ sbc8560_setup_arch(void)
 	invalidate_tlbcam_entry(num_tlbcam_entries - 1);
 #endif
 
+	/* setup the board related info for the MDIO bus */
+	mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
+
+	mdata->irq[25] = MPC85xx_IRQ_EXT6;
+	mdata->irq[26] = MPC85xx_IRQ_EXT7;
+	mdata->irq[31] = -1;
+	mdata->paddr += binfo->bi_immr_base;
+
 	/* setup the board related information for the enet controllers */
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC85xx_IRQ_EXT6;
-		pdata->phyid = 25;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_25;
 		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
 	}
 
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-		pdata->interruptPHY = MPC85xx_IRQ_EXT7;
-		pdata->phyid = 26;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_26;
 		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
 	}

diff --git a/arch/ppc/platforms/85xx/stx_gp3.c b/arch/ppc/platforms/85xx/stx_gp3.c
--- a/arch/ppc/platforms/85xx/stx_gp3.c
+++ b/arch/ppc/platforms/85xx/stx_gp3.c

@@ -92,6 +92,9 @@ static u8 gp3_openpic_initsenses[] __ini
 	0x0,				/* External 11: */
 };
 
+static const char *GFAR_PHY_2 = "phy0:2";
+static const char *GFAR_PHY_4 = "phy0:4";
+
 /*
  * Setup the architecture
  */

@@ -101,6 +104,7 @@ gp3_setup_arch(void)
 	bd_t *binfo = (bd_t *) __res;
 	unsigned int freq;
 	struct gianfar_platform_data *pdata;
+	struct gianfar_mdio_data *mdata;
 
 	cpm2_reset();

@@ -119,23 +123,26 @@ gp3_setup_arch(void)
 	mpc85xx_setup_hose();
 #endif
 
+	/* setup the board related info for the MDIO bus */
+	mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
+
+	mdata->irq[2] = MPC85xx_IRQ_EXT5;
+	mdata->irq[4] = MPC85xx_IRQ_EXT5;
+	mdata->irq[31] = -1;
+	mdata->paddr += binfo->bi_immr_base;
+
 	/* setup the board related information for the enet controllers */
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
 	if (pdata) {
 	/*	pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */
-		pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-		pdata->phyid = 2;
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_2;
 		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
 	}
 
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
 	if (pdata) {
 	/*	pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */
-		pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-		pdata->phyid = 4;
-		/* fixup phy address */
-		pdata->phy_reg_addr += binfo->bi_immr_base;
+		pdata->bus_id = GFAR_PHY_4;
 		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
 	}

diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c
--- a/arch/ppc/syslib/mpc85xx_devices.c
+++ b/arch/ppc/syslib/mpc85xx_devices.c

@@ -25,19 +25,20 @@
 /* We use offsets for IORESOURCE_MEM since we do not know at compile time
  * what CCSRBAR is, will get fixed up by mach_mpc85xx_fixup
  */
+struct gianfar_mdio_data mpc85xx_mdio_pdata = {
+	.paddr = MPC85xx_MIIM_OFFSET,
+};
 
 static struct gianfar_platform_data mpc85xx_tsec1_pdata = {
 	.device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
 	    FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
 	    FSL_GIANFAR_DEV_HAS_MULTI_INTR,
-	.phy_reg_addr = MPC85xx_ENET1_OFFSET,
 };
 
 static struct gianfar_platform_data mpc85xx_tsec2_pdata = {
 	.device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
 	    FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
 	    FSL_GIANFAR_DEV_HAS_MULTI_INTR,
-	.phy_reg_addr = MPC85xx_ENET1_OFFSET,
 };
 
 static struct gianfar_platform_data mpc85xx_etsec1_pdata = {

@@ -46,7 +47,6 @@ static struct gianfar_platform_data mpc8
 	    FSL_GIANFAR_DEV_HAS_MULTI_INTR |
 	    FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
 	    FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
-	.phy_reg_addr = MPC85xx_ENET1_OFFSET,
 };
 
 static struct gianfar_platform_data mpc85xx_etsec2_pdata = {

@@ -55,7 +55,6 @@ static struct gianfar_platform_data mpc8
 	    FSL_GIANFAR_DEV_HAS_MULTI_INTR |
 	    FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
 	    FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
-	.phy_reg_addr = MPC85xx_ENET1_OFFSET,
 };
 
 static struct gianfar_platform_data mpc85xx_etsec3_pdata = {

@@ -64,7 +63,6 @@ static struct gianfar_platform_data mpc8
 	    FSL_GIANFAR_DEV_HAS_MULTI_INTR |
 	    FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
 	    FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
-	.phy_reg_addr = MPC85xx_ENET1_OFFSET,
 };
 
 static struct gianfar_platform_data mpc85xx_etsec4_pdata = {

@@ -73,11 +71,10 @@ static struct gianfar_platform_data mpc8
 	    FSL_GIANFAR_DEV_HAS_MULTI_INTR |
 	    FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
 	    FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
-	.phy_reg_addr = MPC85xx_ENET1_OFFSET,
 };
 
 static struct gianfar_platform_data mpc85xx_fec_pdata = {
-	.phy_reg_addr = MPC85xx_ENET1_OFFSET,
+	.device_flags = 0,
 };
 
 static struct fsl_i2c_platform_data mpc85xx_fsl_i2c_pdata = {

@@ -718,6 +715,12 @@ struct platform_device ppc_sys_platform_
 				.flags	= IORESOURCE_IRQ,
 			},
 		},
+	},
+	[MPC85xx_MDIO] = {
+		.name = "fsl-gianfar_mdio",
+		.id = 0,
+		.dev.platform_data = &mpc85xx_mdio_pdata,
+		.num_resources = 0,
 	},
 };

diff --git a/arch/ppc/syslib/mpc85xx_sys.c b/arch/ppc/syslib/mpc85xx_sys.c
--- a/arch/ppc/syslib/mpc85xx_sys.c
+++ b/arch/ppc/syslib/mpc85xx_sys.c

@@ -24,19 +24,19 @@ struct ppc_sys_spec ppc_sys_specs[] = {
 		.ppc_sys_name	= "8540",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x80300000,
-		.num_devices	= 10,
+		.num_devices	= 11,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_FEC, MPC85xx_IIC1,
 			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
-			MPC85xx_PERFMON, MPC85xx_DUART,
+			MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8560",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x80700000,
-		.num_devices	= 19,
+		.num_devices	= 20,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,

@@ -45,14 +45,14 @@ struct ppc_sys_spec ppc_sys_specs[] = {
 			MPC85xx_CPM_SPI, MPC85xx_CPM_I2C, MPC85xx_CPM_SCC1,
 			MPC85xx_CPM_SCC2, MPC85xx_CPM_SCC3, MPC85xx_CPM_SCC4,
 			MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2, MPC85xx_CPM_FCC3,
-			MPC85xx_CPM_MCC1, MPC85xx_CPM_MCC2,
+			MPC85xx_CPM_MCC1, MPC85xx_CPM_MCC2, MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8541",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x80720000,
-		.num_devices	= 13,
+		.num_devices	= 14,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,

@@ -60,13 +60,14 @@ struct ppc_sys_spec ppc_sys_specs[] = {
 			MPC85xx_PERFMON, MPC85xx_DUART,
 			MPC85xx_CPM_SPI, MPC85xx_CPM_I2C,
 			MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
+			MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8541E",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x807A0000,
-		.num_devices	= 14,
+		.num_devices	= 15,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,

@@ -74,13 +75,14 @@ struct ppc_sys_spec ppc_sys_specs[] = {
 			MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
 			MPC85xx_CPM_SPI, MPC85xx_CPM_I2C,
 			MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
+			MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8555",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x80710000,
-		.num_devices	= 19,
+		.num_devices	= 20,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,

@@ -91,13 +93,14 @@ struct ppc_sys_spec ppc_sys_specs[] = {
 			MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
 			MPC85xx_CPM_SMC1, MPC85xx_CPM_SMC2,
 			MPC85xx_CPM_USB,
+			MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8555E",
 		.mask 		= 0xFFFF0000,
 		.value 		= 0x80790000,
-		.num_devices	= 20,
+		.num_devices	= 21,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,

@@ -108,6 +111,7 @@ struct ppc_sys_spec ppc_sys_specs[] = {
 			MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
 			MPC85xx_CPM_SMC1, MPC85xx_CPM_SMC2,
 			MPC85xx_CPM_USB,
+			MPC85xx_MDIO,
 		},
 	},
 	/* SVRs on 8548 rev1.0 matches for 8548/8547/8545 */

@@ -115,104 +119,112 @@ struct ppc_sys_spec ppc_sys_specs[] = {
 		.ppc_sys_name	= "8548E",
 		.mask 		= 0xFFFF00F0,
 		.value 		= 0x80390010,
-		.num_devices	= 13,
+		.num_devices	= 14,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
 			MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
 			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
 			MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
+			MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8548",
 		.mask 		= 0xFFFF00F0,
 		.value 		= 0x80310010,
-		.num_devices	= 12,
+		.num_devices	= 13,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
 			MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
 			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
 			MPC85xx_PERFMON, MPC85xx_DUART,
+			MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8547E",
 		.mask 		= 0xFFFF00F0,
 		.value 		= 0x80390010,
-		.num_devices	= 13,
+		.num_devices	= 14,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
 			MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
 			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
 			MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
+			MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8547",
 		.mask 		= 0xFFFF00F0,
 		.value 		= 0x80310010,
-		.num_devices	= 12,
+		.num_devices	= 13,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
 			MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
 			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
 			MPC85xx_PERFMON, MPC85xx_DUART,
+			MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8545E",
 		.mask 		= 0xFFFF00F0,
 		.value 		= 0x80390010,
-		.num_devices	= 11,
+		.num_devices	= 12,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_eTSEC1, MPC85xx_eTSEC2,
 			MPC85xx_IIC1, MPC85xx_IIC2,
 			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
 			MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
+			MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8545",
 		.mask 		= 0xFFFF00F0,
 		.value 		= 0x80310010,
-		.num_devices	= 10,
+		.num_devices	= 11,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_eTSEC1, MPC85xx_eTSEC2,
 			MPC85xx_IIC1, MPC85xx_IIC2,
 			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
 			MPC85xx_PERFMON, MPC85xx_DUART,
+			MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8543E",
 		.mask 		= 0xFFFF00F0,
 		.value 		= 0x803A0010,
-		.num_devices	= 11,
+		.num_devices	= 12,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_eTSEC1, MPC85xx_eTSEC2,
 			MPC85xx_IIC1, MPC85xx_IIC2,
 			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
 			MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
+			MPC85xx_MDIO,
 		},
 	},
 	{
 		.ppc_sys_name	= "8543",
 		.mask 		= 0xFFFF00F0,
 		.value 		= 0x80320010,
-		.num_devices	= 10,
+		.num_devices	= 11,
 		.device_list	= (enum ppc_sys_devices[])
 		{
 			MPC85xx_eTSEC1, MPC85xx_eTSEC2,
 			MPC85xx_IIC1, MPC85xx_IIC2,
 			MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
 			MPC85xx_PERFMON, MPC85xx_DUART,
+			MPC85xx_MDIO,
 		},
 	},
 	{	/* default match */

diff --git a/include/asm-ppc/mpc85xx.h b/include/asm-ppc/mpc85xx.h
--- a/include/asm-ppc/mpc85xx.h
+++ b/include/asm-ppc/mpc85xx.h

@@ -67,6 +67,8 @@ extern unsigned char __res[];
 #define MPC85xx_DMA3_SIZE	(0x00080)
 #define MPC85xx_ENET1_OFFSET	(0x24000)
 #define MPC85xx_ENET1_SIZE	(0x01000)
+#define MPC85xx_MIIM_OFFSET	(0x24520)
+#define MPC85xx_MIIM_SIZE	(0x00018)
 #define MPC85xx_ENET2_OFFSET	(0x25000)
 #define MPC85xx_ENET2_SIZE	(0x01000)
 #define MPC85xx_ENET3_OFFSET	(0x26000)

@@ -132,6 +134,7 @@ enum ppc_sys_devices {
 	MPC85xx_eTSEC3,
 	MPC85xx_eTSEC4,
 	MPC85xx_IIC2,
+	MPC85xx_MDIO,
 };
 
 /* Internal interrupts are all Level Sensitive, and Positive Polarity */

diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h

@@ -47,14 +47,19 @@
 struct gianfar_platform_data {
 	/* device specific information */
 	u32 device_flags;
-	u32 phy_reg_addr;
 
 	/* board specific information */
 	u32 board_flags;
-	u32 phy_flags;
-	u32 phyid;
-	u32 interruptPHY;
+	const char *bus_id;
 	u8 mac_addr[6];
+};
+
+struct gianfar_mdio_data {
+	/* device specific information */
+	u32 paddr;
+
+	/* board specific information */
+	int irq[32];
 };
 
 /* Flags related to gianfar device features */

`h`	back out one level
`j`	next message in thread / next series-diff position
`k`	previous message in thread / previous series-diff position
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help

: Gianfar PHY Platform update

Subsystems (1)

Maintainers (1)