Re: pci_enable_device fails on MPC8541

Bizhan,

A few questions:

1. what kernel version are you using on these boards:
2. can you do an lspci -v on the boards

- kumar

On Aug 8, 2005, at 1:12 PM, Bizhan Gholikhamseh \(((bgholikh\))) wrote:

Hi All,
I am using two evaluation board from freescale, 8540ADS and  
MPC8541. The
same PCI driver is being compiled and loaded on both platforms. The  
same
PCI driver (developed by me) for DSP board compiled and loaded on both
platforms.

When I type: "insmod C6415.ko" on 8541 board, I get the following  
error:
"PCI: Device 0000:02:01.0 not available because of resource  
collisions"
This messages is because of the execution of the generic PCI Linux
command:
"pci_enable_device(pdev)"
The same API has no problem on 8540ADS.

quoted

From UBOOT I can see my device is on bus 3:

=> pci 3
Scanning PCI devices on bus 3
BusDev FUN    VendorID    DeviceID    Device Class    Sub-Class
---------------------------------------------------------------------- 
--
--------------------
03.01.00            0x104c    0xa106        .........

Any idea why the insmod fails on one board and not on the other one?

Many thanks in advance,
Bizhan

<ATT2118305.txt>