Volunteers to test i2c-algo-8xx on v2.6?

Hi

Had a look at my old driver and it needs a little care.

Basically this block has changed 

+	if(count > 16){
+		/* Chip bug, set enable here */
+		local_irq_save(flags);
+		i2c->i2c_i2cmr = 0x13;	/* Enable some interupts */
+		i2c->i2c_i2cer = 0xff;
+		i2c->i2c_i2mod |= 1;	/* Enable */
+		i2c->i2c_i2com |= 0x80;	/* Begin transmission */
+
+		/* Wait for IIC transfer */
+		tmo = interruptible_sleep_on_timeout(&iic_wait,1*HZ);
+		local_irq_restore(flags);
+	} else { /* busy wait for small transfers, its faster */
+		i2c->i2c_i2cmr = 0x00;	/* Disable I2C interupts */
+		i2c->i2c_i2cer = 0xff;
+		i2c->i2c_i2mod |= 1;	/* Enable */
+		i2c->i2c_i2com |= 0x80;	/* Begin transmission */
+		tmo = jiffies + 1*HZ;
+	       	/* Busy wait, with a timeout */
+		while(!(i2c->i2c_i2cer & 0x11 || time_after(jiffies, tmo)));
+	}

into

+		/* Chip bug, set enable here */
+		local_irq_save(flags);
+		i2c->i2c_i2cmr = 0x13;	/* Enable some interupts */
+		i2c->i2c_i2cer = 0xff;
+		i2c->i2c_i2mod |= 1;	/* Enable */
+		i2c->i2c_i2com |= 0x80 | 0x01; /* Begin transmission and force master.

                                              Some errors(CL) clears the M/S bit */

+
+		/* Wait for IIC transfer */
+		tmo = interruptible_sleep_on_timeout(&iic_wait,1*HZ);
+		local_irq_restore(flags);

I have done this for cpm_iic_read, cpm_iic_write and cpm_iic_try_address.
Also note the the addition of "| 0x01" to i2c->i2c_i2com.