Thread (11 messages) flat view 11 messages, 5 authors, 2005-08-17

Re: [F]Framebuffer driver using SM501 hardware.

From: Andrey Volkov <hidden>
Date: 2005-08-17 14:52:40
Also in: linux-fbdev


Clemens Koller wrote:
Hi Geert, Andrey and friends...

I am working on ppc, MPC8540, SM501 on PCI,
drivers=voyagerfb-0.2.tar.gz from last post.
on linux-2.6

Geert wrote:
quoted
Sorry, I cannot follow.

 1. If it's a palette issue, your setcolreg() routine doesn't fill in
correctly
    the pseudo palette,
 2. If it's a RGB565 vs. BGR565 issue, you don't fill in correctly the
offsets
    in the color bitfields in fb_var_screeninfo,
 3. If it's an endian issue, it's RRRRRGGGGGGBBBBB vs.GGBBBBBRRRRGGGG,
right?
    And then there's no much we can do...

It looks for me like 3. = bytes are flipped = an endian issue:
In 32 (RGBAlpha) mode (the one we want to use) the colors appear
wrong. I get my /dev/fb0 appear as
BB GG RR aa BB GG RR aa BB GG RR aa ...

In the 
great 
You're forget qutation here :)

SM501 Databook Version 1.02, Page 2-39, it says:
Configuration 2, Endian Control at MMIO_base+0x00005c:
write 0x00000000 for little endian or
write 0xffffffff for big endian
into this register before touching any other register of the sm501.
I've tried that, but it didn't change anything on my system. :-(
(Well, we can flip the DAC outputs in our hw design ;-)
As I understand, but I'm not sure, LE/BE controlled only by some GPIO
pin (GPIO4 was on rev A/B). I try write to this reg too, with same result.
Best greets,

Clemens
_______________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany

http://www.anagramm.de
Phone: +49-89-741518-50
Fax: +49-89-741518-19

------------------------------------------------
details:

$ cp red /dev/fb0 gives me a some red color...
$ bvi red
00000000  00 00 FF 00 00 00 FF 00 00 00 FF 00 00 00 FF 00 ................
00000010  00 00 FF 00 00 00 FF 00 00 00 FF 00 00 00 FF 00 ................
00000020  00 00 FF 00 00 00 FF 00 00 00 FF 00 00 00 FF 00 ................
...
$ cp green /dev/fb0 gives me a some green color...
00 FF 00 00 00 FF 00 00 00 FF 00 00 00 FF 00 00
...
$ cp blue /dev/fb0
well... blue
FF 00 00 00 FF 00 00 00 FF 00 00 00 FF 00 00 00
-- 
Regards
Andrey Volkov
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help