Hi Daniel,

On Friday 29 July 2005 22:06, Daniel Ann wrote:

Hi folks,

Just wondering if anyone could lend a hand with this problem I have
with serial console. I'm trying to boot up my board (very similar to
sandpoint using MPC8245) with kernel 2.6.12.3, and most of it is
working but console will display up to,
[snip]
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 112k init

I've done series of printk in sys_execve() to see if /sbin/init is
working, and found out it went thru the whole rcS file okay. Mind you,
printk is successfully displaying the output on the console while I'm
still not getting anything from the user processes.

Having all the kernel boot up log on console means that I've done some
part right. But why am I not getting anything from the user processes
on the console screen ?

Please verify that you have a /dev/console in your rootfs, and that it's =
being=20
correctly acessed by the init process.

HTH,

--=20
Ricardo Scop.

        \|/
    ___ -*-
   (@ @)/|\
  /  V  \|  R SCOP Consult.
 /(     )\  Linux-based communications
--^^---^^+------------------------------
rscop@matrix.com.br
+55 51 999-36-777
Porto Alegre, RS - BRazil