Re: kernel ported from ELDK 3.0 hangs (loops in idled()) on my custom MPC870 Board

In message [ref] you wrote:

I am trying to bring up Linux on a custom MPC870 Board using ELDK 3.0. 

Why are you using old (not to say ancient) tools?

The ported kernel from ELDK 3.0 hangs (loops in idled()) and the kernel_thread 
init never gets started!???

How do you know that init didn't  run?  Runningthe  idle  loop  is  a
perfectly normal situation.

Linux version 2.4.24-pre2 (ehong@chico) (gcc version 3.2.2 20030217 (Yellow
Dog Linux 3.0 3.2.2-2a_1)) #8 Fri Jun 3 10:13:10 MDT 2005 On node 0 
totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/nfs rw nfsroot=10.15.10.170:/opt/eldk/pp
c_8xx 
ip=10.15.2.101:10.15.10.170::::eth0:off panic=1
Decrementer Frequency = 495000000/60
Calibrating delay loop... 131.48 BogoMIPS
Memory: 63132k available (1204k kernel code, 360k data, 60k init, 0k highme
m)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX


(kernel loops in idled() after kernel_thread(init, ...) in rest_init().) 

Are you sure that your kernel configuration is sensible? For example,
did you configure a console port that matches your hardware? Did  you
configure the serial ports (SMC / SCC) at all?

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
I read part of it all the way through.