Re: MPC885 - USB HCI drivers.

Hi Pantelis,

Are your drivers compatible with linux kernel 2.6.x ?
I'll be interested to have a look at them if you don't mind.

Also, do you think an USB bus analyzer is a *must have* in order to work 
on the drivers ?

Regards,
Guillaume.


Pantelis Antoniou wrote:

Wolfgang Denk wrote:

quoted

Dear Mike,

in message [ref] you wrote:

quoted

Do you know if the same is applicable to CPM2 USB controllers 
present for example on mpc8247?

Sorry, I don't know from personal experience. But from what  I  heard
there might be some "surprises", too.

quoted

The Freescale sales representative we work with actually says that 
CPM2 USB host controller is working well.

Of course they do. They say the same for the 850 and 823 :-(

Best regards,

Wolfgang Denk

Well I have USB host drivers for both 8xx & 82xx working.

It was not a piece of cake exactly to get them to work
but they seem to work fine even under heavy traffic.

However I use them connected to a specific peripheral
so I don't know how well they fare when used as a PC
style USB host controller.

YMMV

Regards

Pantelis

_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

-- 
=======================================
Guillaume Autran
Senior Software Engineer
MRV Communications, Inc.
Tel: (978) 952-4932 office
E-mail: gautran@mrv.com
=======================================