RE: MPC8245 custom board, Linux 2.4 kernel hangs after uncompressing

Atit_Shah [off-list ref] wrote：

1. Check your log buffer...your console may not be
initialized yet so all your printk are logged at a 
particular memory location. Checkout the
System.map file in the Linux folder for "log_buf".
The address that you have there subtract it with 
the kernel base address. Then in view your
memory at that location. We used U-Boot so we gave
the command
	
	md <log_buff address>

Interesting to me as well. I also have such a similar
problem. But I wanna to know how I can return to 
u-boot with software workaround after kernel hanging.
At least, I must power-off and power-on my target to
get back to u-boot console. If so, the last kernel 
printk message would lost IMHO.

Thanks,

Sam

P.S. Atit_Shah, if possibel, pls set your subscribing
setting  "...daily digest" as "no" to avoid reply
inconvenience on the title:)

_________________________________________________________
Do You Yahoo!?
150万曲MP3疯狂搜，带您闯入音乐殿堂
http://music.yisou.com/
美女明星应有尽有，搜遍美图、艳图和酷图
http://image.yisou.com
1G就是1000兆，雅虎电邮自助扩容！
http://cn.rd.yahoo.com/mail_cn/tag/1g/*http://cn.mail.yahoo.com/event/mail_1g/