Re: custom board MPC8266

Thanks for the reply. 
I have seen the file arch/ppc/8260_io/commproc.c, but there is nowhere
given where to configure the SMC1/SMC2/SCC1/SCC2 as serial console. In
the .config file, whether we have to set CONFIG_SCC_CONSOLE=y option
and in this .config file, is it required to do any configuration to
set SMC1 as serial console?

Please clarify.

Thanking you in advance.

Regards,
Manisha


On Mar 30, 2005 7:57 PM, Rune Torgersen [off-list ref] wrote:

If I remember correctly: You have to edit the
arch/ppc/82xx_io/commproc.c file (I think) to set up which serial port
is used for console port.

quoted

-----Original Message-----
From: linuxppc-embedded-bounces@ozlabs.org
[mailto:linuxppc-embedded-bounces@ozlabs.org] On Behalf Of
Manisha Jagadhane
Sent: Wednesday, March 30, 2005 05:32
To: linuxppc-embedded@ozlabs.org
Subject: custom board MPC8266

Hi,

I am using custom board based on MPC8266 processor. I have
successfully ported U-Boot 1.1.1 on it. I have used SMC1 as serial
port in the board. Does the 2.4.24 kernel version for ppc supports
SMC1 as serial console? Which configuration I have to give in the
.config file to configure SMC1 as serial console? Which board's
defconfig file  shall I take as a reference and which kernel version
shall I use?

Please help me in this regard.

Thanking you in advance.

Regards,

Manisha.
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded