2.6.11 prep image on radstone ppc4a not booting
flat view
From: Brian V. Madzarevic <hidden>
Date: 2005-03-08 18:20:18
I am trying to boot a Linux 2.6.11 prep image on a Radstone PPC4A. PPC4A Specifications http://www.radstone.com/rtcd/pdfs/ppc4a.pdf I was trying to get an nfs filesystem mounted, but after the bios retrieves the kernel using tftp, no more packets are even sent out. I don't know if there is a problem with the network driver or the PCI bus or what. Here is my boot log: Radstone Technology. SilverChip PowerPC PReP Boot Firmware Version: 4.05 Built (Jan 20 2004 10:34:02) PPC4a-7400 333MHz, 83MHz Bus Rev. 3B Ser. No. 0003815 ID No. 0xd PCI devices 0 0 ID 0x00021057 Motorola MPC106 PowerPC Chipset, Rev. 4.0 0 1 Fn 0 ID 0x056510ad Winbond W83C553F ISA bridge, Rev. 1.0 0 1 Fn 1 ID 0x010510ad Winbond W83C553F IDE controller, Rev. 0.5 0 2 ID 0x00061000 LSI 53C860 Ultra SCSI/Narrow, Rev. 0.2 0 3 ID 0x00191011 DEC DC21143 PCI/CardBus 10/100 Mbit Ethernet Ctlr, Rev. 4.1 0 4 ID 0x000010e3 Tundra CA91C042 VMEbus Bridge, Rev. 0.1 2 Mbytes of L2 cache on a 133MHz cache bus 128 Mbytes of SDRAM Floppy drive 0 Floppy drive 1 SCSI id 0 SCSI id 1 SCSI id 2 SCSI id 3 SCSI id 4 SCSI id 5 SCSI id 6 No keyboard found. Using COM1 for input. No boot authentication required Opening File "multi()net()server(192.168.1.73)clientip(192.168.1.147)brian26.prp" Loading ... loaded at: 00800400 00912F4C relocated to: 00800000 00912B4C zimage at: 0080A86C 00909B2E avail ram: 00400000 00800000 Linux/PPC load: console=3DttyS0,9600 console=3Dtty0 panic=3D0 = root=3D/dev/nfs nfsroot=3D192.168.1.73:/export/nfsroot ip=3D192.168.1.147:192.168.1.73::255.255.255.0::eth0 Uncompressing Linux...done. Now booting the kernel Total memory =3D 128MB; using 256kB for hash table (at c0240000) Linux version 2.6.11 (brian@rex) (gcc version 3.4.1) #6 Mon Mar 7 15:50:16 PST 2005 PReP architecture Built 1 zonelists Kernel command line: console=3DttyS0,9600 console=3Dtty0 panic=3D0 root=3D/dev/nfs nfsroot=3D192.168.1.73:/export/nfsroot ip=3D192.168.1.147:192.168.1.73::255.255.255.0::eth0 PID hash table entries: 1024 (order: 10, 16384 bytes) TODC real-time-clock was stopped. Now starting... time_init: decrementer frequency =3D 20.833333 MHz Warning: real time clock seems stuck! Console: colour dummy device 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 127232k available (1512k kernel code, 640k data, 136k init, 0k highmem) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) NET: Registered protocol family 16 PCI: Probing PCI hardware Setting PCI interrupts for a "Blackhawk (Powerstack)" PCI: Cannot allocate resource region 0 of device 0000:00:0b.1 PCI: Cannot allocate resource region 1 of device 0000:00:0b.1 PCI: Cannot allocate resource region 2 of device 0000:00:0b.1 PCI: Cannot allocate resource region 3 of device 0000:00:0b.1 PCI: Cannot allocate resource region 4 of device 0000:00:0b.1 PCI: Cannot allocate resource region 5 of device 0000:00:0b.1 PCI: Cannot allocate resource region 0 of device 0000:00:0c.0 PCI: Cannot allocate resource region 0 of device 0000:00:0d.0 PCI: Cannot allocate resource region 0 of device 0000:00:0e.0 PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes) PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes) PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes) PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes) PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes) PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes) PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes) PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes) PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes) PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes) PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes) PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes) PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes) Generic RTC Driver v1.07 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Linux Tulip driver version 1.1.13 (May 11, 2002) tulip0: EEPROM default media type Autosense. tulip0: Index #0 - Media 10baseT (#0) described by a 21140 non-MII (0) block. tulip0: Index #1 - Media 10base2 (#1) described by a <unknown> (8) block. tulip0: Index #2 - Media 10baseT (#0) described by a 21140 non-MII (0) block. tulip0: Index #3 - Media 10baseT (#0) described by a 21140 non-MII (0) block. eth0: Digital DS21143 Tulip rev 65 at 80001080, 00:80:8E:00:5D:5B, IRQ 0. mice: PS/2 mouse device common for all mice atkbd.c: keyboard reset failed on isa0060/serio1 atkbd.c: keyboard reset failed on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 1024 buckets, 8Kbytes TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) NET: Registered protocol family 1 NET: Registered protocol family 17 IP-Config: Complete: device=3Deth0, addr=3D192.168.1.147, mask=3D255.255.255.0, gw=3D255.255.255.255, host=3D192.168.1.147, domain=3D, nis-domain=3D(none), bootserver=3D192.168.1.73, rootserver=3D192.168.1.73, rootpath=3D Looking up port of RPC 100003/2 on 192.168.1.73 portmap: server 192.168.1.73 not responding, timed out Root-NFS: Unable to get nfsd port number from server, using default Looking up port of RPC 100005/1 on 192.168.1.73 portmap: server 192.168.1.73 not responding, timed out Root-NFS: Unable to get mountd port number from server, using default NETDEV WATCHDOG: eth0: transmit timed out eth0: 21140 transmit timed out, status f8678105, SIA 000000c5 ffff0001 fffbff7f 8ff04008, resetting... eth0: transmit timed out, switching to 100baseTx media. NETDEV WATCHDOG: eth0: transmit timed out eth0: 21140 transmit timed out, status f8278517, SIA 000000cb ffff0001 fffbff7f 8ff04008, resetting... eth0: transmit timed out, switching to 10baseT media. NETDEV WATCHDOG: eth0: transmit timed out eth0: 21140 transmit timed out, status f8678117, SIA 000000cb ffff0001 fffbff7f 8ff04008, resetting... eth0: transmit timed out, switching to 10baseT media. mount: server 192.168.1.73 not responding, timed out Root-NFS: Server returned error -5 while mounting /export/nfsroot VFS: Unable to mount root fs via NFS, trying floppy. Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0) <6>NETDEV WATCHDOG: eth0: transmit timed out eth0: 21140 transmit timed out, status f8278517, SIA 000000cb ffff0001 fffbff7f 8ff04008, resetting... eth0: transmit timed out, switching to 10baseT media. Here is my .config file:=20 # # Automatically generated make config: don't edit # Linux kernel version: 2.6.11 # Mon Mar 7 15:44:49 2005 # CONFIG_MMU=3Dy CONFIG_GENERIC_HARDIRQS=3Dy CONFIG_RWSEM_XCHGADD_ALGORITHM=3Dy CONFIG_GENERIC_CALIBRATE_DELAY=3Dy CONFIG_HAVE_DEC_LOCK=3Dy CONFIG_PPC=3Dy CONFIG_PPC32=3Dy CONFIG_GENERIC_NVRAM=3Dy # # Code maturity level options # CONFIG_EXPERIMENTAL=3Dy # CONFIG_CLEAN_COMPILE is not set CONFIG_BROKEN=3Dy CONFIG_BROKEN_ON_SMP=3Dy # # General setup # CONFIG_LOCALVERSION=3D"" CONFIG_SWAP=3Dy CONFIG_SYSVIPC=3Dy CONFIG_POSIX_MQUEUE=3Dy CONFIG_BSD_PROCESS_ACCT=3Dy # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=3Dy # CONFIG_AUDIT is not set CONFIG_LOG_BUF_SHIFT=3D14 CONFIG_HOTPLUG=3Dy CONFIG_KOBJECT_UEVENT=3Dy CONFIG_IKCONFIG=3Dy CONFIG_IKCONFIG_PROC=3Dy # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=3Dy # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_FUTEX=3Dy CONFIG_EPOLL=3Dy # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=3Dy CONFIG_CC_ALIGN_FUNCTIONS=3D0 CONFIG_CC_ALIGN_LABELS=3D0 CONFIG_CC_ALIGN_LOOPS=3D0 CONFIG_CC_ALIGN_JUMPS=3D0 # CONFIG_TINY_SHMEM is not set # # Loadable module support # CONFIG_MODULES=3Dy CONFIG_MODULE_UNLOAD=3Dy # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_OBSOLETE_MODPARM=3Dy CONFIG_MODVERSIONS=3Dy CONFIG_MODULE_SRCVERSION_ALL=3Dy CONFIG_KMOD=3Dy # # Processor # CONFIG_6xx=3Dy # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_POWER3 is not set # CONFIG_POWER4 is not set # CONFIG_8xx is not set # CONFIG_E500 is not set # CONFIG_ALTIVEC is not set # CONFIG_TAU is not set # CONFIG_CPU_FREQ is not set # CONFIG_PPC601_SYNC_FIX is not set CONFIG_PPC_STD_MMU=3Dy # # Platform options # CONFIG_PPC_MULTIPLATFORM=3Dy # CONFIG_APUS is not set # CONFIG_KATANA is not set # CONFIG_WILLOW is not set # CONFIG_CPCI690 is not set # CONFIG_PCORE is not set # CONFIG_POWERPMC250 is not set # CONFIG_CHESTNUT is not set # CONFIG_SPRUCE is not set # CONFIG_EV64260 is not set # CONFIG_LOPEC is not set # CONFIG_MCPN765 is not set # CONFIG_MVME5100 is not set # CONFIG_PPLUS is not set # CONFIG_PRPMC750 is not set # CONFIG_PRPMC800 is not set # CONFIG_SANDPOINT is not set # CONFIG_ADIR is not set # CONFIG_K2 is not set # CONFIG_PAL4 is not set # CONFIG_GEMINI is not set # CONFIG_EST8260 is not set # CONFIG_SBC82xx is not set # CONFIG_SBS8260 is not set # CONFIG_RPX8260 is not set # CONFIG_TQM8260 is not set # CONFIG_ADS8272 is not set # CONFIG_PQ2FADS is not set # CONFIG_LITE5200 is not set CONFIG_PPC_CHRP=3Dy CONFIG_PPC_PMAC=3Dy CONFIG_PPC_PREP=3Dy CONFIG_PPC_OF=3Dy CONFIG_PPCBUG_NVRAM=3Dy # CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_HIGHMEM is not set CONFIG_BINFMT_ELF=3Dy # CONFIG_BINFMT_MISC is not set # CONFIG_PROC_DEVICETREE is not set CONFIG_PREP_RESIDUAL=3Dy CONFIG_PROC_PREPRESIDUAL=3Dy CONFIG_CMDLINE_BOOL=3Dy CONFIG_CMDLINE=3D"console=3DttyS0,9600 console=3Dtty0 panic=3D0 = root=3D/dev/nfs nfsroot=3D192.168.1.73:/export/nfsroot ip=3D192.168.1.147:192.168.1.73::255.255.255.0::eth0" # # Bus options # # CONFIG_ISA is not set CONFIG_GENERIC_ISA_DMA=3Dy CONFIG_PCI=3Dy CONFIG_PCI_DOMAINS=3Dy # CONFIG_PCI_LEGACY_PROC is not set # CONFIG_PCI_NAMES is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set # # PC-card bridges # # # Advanced setup # # CONFIG_ADVANCED_OPTIONS is not set # # Default settings for advanced configuration options are used # CONFIG_HIGHMEM_START=3D0xfe000000 CONFIG_LOWMEM_SIZE=3D0x30000000 CONFIG_KERNEL_START=3D0xc0000000 CONFIG_TASK_SIZE=3D0x80000000 CONFIG_BOOT_LOAD=3D0x00800000 # # Device Drivers # # # Generic Driver Options # CONFIG_STANDALONE=3Dy CONFIG_PREVENT_FIRMWARE_BUILD=3Dy # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # # CONFIG_PARPORT is not set # # Plug and Play support # # # Block devices # # CONFIG_BLK_DEV_FD is not set # CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=3D16 CONFIG_INITRAMFS_SOURCE=3D"" # CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=3Dy CONFIG_IOSCHED_AS=3Dy CONFIG_IOSCHED_DEADLINE=3Dy CONFIG_IOSCHED_CFQ=3Dy # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # # CONFIG_IDE is not set # # SCSI device support # CONFIG_SCSI=3Dm CONFIG_SCSI_PROC_FS=3Dy # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=3Dm # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=3Dy CONFIG_SCSI_LOGGING=3Dy # # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=3Dm # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set CONFIG_SCSI_SYM53C8XX_2=3Dm CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=3D1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=3D16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=3D64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=3Dm # CONFIG_SCSI_QLA21XX is not set # CONFIG_SCSI_QLA22XX is not set # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_MESH is not set # CONFIG_SCSI_MAC53C94 is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # # Macintosh device drivers # # CONFIG_ADB is not set # CONFIG_ADB_CUDA is not set # CONFIG_ADB_PMU is not set # CONFIG_MAC_SERIAL is not set # # Networking support # CONFIG_NET=3Dy # # Networking options # CONFIG_PACKET=3Dy # CONFIG_PACKET_MMAP is not set # CONFIG_NETLINK_DEV is not set CONFIG_UNIX=3Dy # CONFIG_NET_KEY is not set CONFIG_INET=3Dy # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_PNP=3Dy CONFIG_IP_PNP_DHCP=3Dy CONFIG_IP_PNP_BOOTP=3Dy CONFIG_IP_PNP_RARP=3Dy # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set CONFIG_IP_TCPDIAG=3Dy # CONFIG_IP_TCPDIAG_IPV6 is not set # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set # # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set CONFIG_NETDEVICES=3Dy # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # # ARCnet devices # # CONFIG_ARCNET is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=3Dy # CONFIG_MII is not set # CONFIG_MACE is not set # CONFIG_BMAC is not set # CONFIG_OAKNET is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # # Tulip family network device support # CONFIG_NET_TULIP=3Dy # CONFIG_DE2104X is not set CONFIG_TULIP=3Dy # CONFIG_TULIP_MWI is not set # CONFIG_TULIP_MMIO is not set # CONFIG_TULIP_NAPI is not set # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set # CONFIG_HP100 is not set # CONFIG_NET_PCI is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # # Ethernet (10000 Mbit) # # CONFIG_IXGB is not set # CONFIG_S2IO is not set # # Token Ring devices # # CONFIG_TR is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Wan interfaces # # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=3Dy # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=3Dy # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=3D1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=3D768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input I/O drivers # # CONFIG_GAMEPORT is not set CONFIG_SOUND_GAMEPORT=3Dy CONFIG_SERIO=3Dy CONFIG_SERIO_I8042=3Dy # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=3Dy # CONFIG_SERIO_RAW is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=3Dy CONFIG_KEYBOARD_ATKBD=3Dy # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Character devices # CONFIG_VT=3Dy CONFIG_VT_CONSOLE=3Dy CONFIG_HW_CONSOLE=3Dy # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=3Dy CONFIG_SERIAL_8250_CONSOLE=3Dy CONFIG_SERIAL_8250_NR_UARTS=3D4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=3Dy CONFIG_SERIAL_CORE_CONSOLE=3Dy # CONFIG_SERIAL_PMACZILOG is not set CONFIG_UNIX98_PTYS=3Dy # CONFIG_LEGACY_PTYS is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=3Dy # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # # I2C support # # CONFIG_I2C is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set # # Misc devices # # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # # Graphics support # # CONFIG_FB is not set # # Console display driver support # CONFIG_VGA_CONSOLE=3Dy CONFIG_DUMMY_CONSOLE=3Dy # # Sound # # CONFIG_SOUND is not set # # USB support # # CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=3Dy CONFIG_USB_ARCH_HAS_OHCI=3Dy # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information # # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # MMC/SD Card support # # CONFIG_MMC is not set # # InfiniBand support # # CONFIG_INFINIBAND is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # # XFS support # # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_QUOTA is not set CONFIG_DNOTIFY=3Dy # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # # CONFIG_MSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=3Dy CONFIG_PROC_KCORE=3Dy CONFIG_SYSFS=3Dy # CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=3Dy # CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=3Dy # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=3Dy CONFIG_NFS_V3=3Dy # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=3Dy CONFIG_LOCKD=3Dy CONFIG_LOCKD_V4=3Dy CONFIG_SUNRPC=3Dy # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=3Dy # # Native Language Support # # CONFIG_NLS is not set # # Library routines # # CONFIG_CRC_CCITT is not set CONFIG_CRC32=3Dy # CONFIG_LIBCRC32C is not set # # Profiling support # # CONFIG_PROFILING is not set # # Kernel hacking # CONFIG_DEBUG_KERNEL=3Dy CONFIG_MAGIC_SYSRQ=3Dy # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set # CONFIG_KGDB is not set CONFIG_XMON=3Dy # CONFIG_BDI_SWITCH is not set CONFIG_BOOTX_TEXT=3Dy # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # # CONFIG_CRYPTO is not set # # Hardware crypto devices #