Thread (4 messages) flat view 4 messages, 2 authors, 2005-01-06

Re: MPC5200 - problem with CF card

From: Jón Benediktsson <hidden>
Date: 2005-01-05 14:49:56 

Whoops, sorry for the HTML.  I forgot to change my e-mail options.
Here comes the plain text:

Hi=20
=20
I am working with a custom MPC5200 board which uses the built-in=20
ATA/IDE controller for a compact flash card.=20
The Linux kernel is Denx linux=5F2=5F4=5Fdevel.=20
=20
I have been using an old SanDisk 16MB CF card which works fine.=20
Here is the console output with this card plugged in:=20
=20
U-Boot 1.1.2 (Dec  2 2004 - 16:01:06)=20
=20
CPU:   MPC5200 v1.2 at 396 MHz=20
       Bus 132 MHz, IPB 66 MHz, PCI 33 MHz=20
Board: Marel NS4=20
I2C:   85 kHz, ready=20
DRAM:  128 MB=20
FLASH: 16 MB=20
In:    serial=20
Out:   serial=20
Err:   serial=20
Net:   FEC ETHERNET=20
IDE:   Bus 0: OK=20
  Device 0: Model: SanDisk SDCFB-16 Firm: vde 1.10 Ser#: 24349220714=20
            Type: Removable Hard Disk=20
            Capacity: 15.3 MB =3D 0.0 GB (31360 x 512)=20
=20
Type "run flash=5Fnfs" to mount root filesystem over NFS=20
=20
Hit any key to stop autoboot:  0=20
Using FEC ETHERNET device=20
TFTP from server 10.100.1.30; our IP address is 10.100.50.68=20
Filename 'mpc5200/uImage'.=20
Load address: 0x200000=20
Loading:=20
#################################################################=20
#################################################################=20
         #############################=20
done=20
Bytes transferred =3D 810417 (c5db1 hex)=20
## Booting image at 00200000 ...=20
   Image Name:   Linux-2.4.25=20
   Created:      2004-12-03  11:35:18 UTC=20
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)=20
   Data Size:    810353 Bytes =3D 791.4 kB=20
   Load Address: 00000000=20
   Entry Point:  00000000=20
   Verifying Checksum ... OK=20
   Uncompressing Kernel Image ... OK=20
Memory BAT mapping: BAT2=3D128Mb, BAT3=3D0Mb, residual: 0Mb=20
Linux version 2.4.25 (jonb@tux.marel.is) (gcc version 3.2.2 20030217
(Yellow Dog=20
 Linux 3.0 3.2.2-2a=5F1)) #4 F=F6s Des 3 11:34:35 UTC 2004=20
On node 0 totalpages: 32768=20
zone(0): 32768 pages.=20
zone(1): 0 pages.=20
zone(2): 0 pages.=20
Kernel command line: root=3D/dev/nfs rw nfsroot=3D10.100.1.30:
/opt/eldk/ppc=5F82xx ip=3D=20
10.100.50.68:10.100.1.30:10.100.254.254:255.255.0.0:ns4b:eth0:off=20
panic=3D1=20
Calibrating delay loop... 263.78 BogoMIPS=20
Memory: 127080k available (1396k kernel code, 464k data, 76k init, 0k=20
highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)=20
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)=20
Mount cache hash table entries: 512 (order: 0, 4096 bytes)=20
Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)=20
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)=20
POSIX conformance testing by UNIFIX=20
PCI: Probing PCI hardware=20
Linux NET4.0 for Linux 2.4=20
Based upon Swansea University Computer Society NET3.039=20
Initializing RT netlink socket=20
Starting kswapd=20
Journalled Block Device driver loaded=20
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.=20
i2c-core.o: i2c core module version 2.6.1 (20010830)=20
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)=20
pty: 256 Unix98 ptys configured=20
ttyS0 on PSC1=20
ttyS1 on PSC2=20
ttyS2 on PSC3=20
PCF8563 Real-Time Clock Driver $Revision: 1.3 $ wd@denx.de=20
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize=20
loop: loaded (max 8 devices)=20
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4=20
ide: Assuming 33MHz system bus speed for PIO modes; override with=20
idebus=3Dxx=20
Port Config is: 0x91050404=20
ipb=3D66MHz, set clock period to 15=20
GPIO config: 91050404=20
ATA invalid: 00800000=20
ATA hostcnf: 03000000=20
ATA pio1   : 100a0a00=20
ATA pio2   : 02040600=20
XLB Arb cnf: 80002006=20
mpc5xxx=5Fide: Setting up IDE interface ide0...=20
Probing IDE interface ide0...=20
hda: SanDisk SDCFB-16, CFA DISK drive=20
ide0 at 0xf0003a60-0xf0003a67,0xf0003a5c on irq 45=20
hda: attached ide-disk driver.=20
hda: 31360 sectors (16 MB) w/1KiB Cache, CHS=3D490/2/32=20
Partition check:=20
 hda: hda1=20
NS4 Bank 0: Found 1 x16 devices at 0x0 in 8-bit mode=20
 Amd/Fujitsu Extended Query Table at 0x0040=20
NS4 Bank 0: CFI does not contain boot bank location. Assuming top.=20
number of CFI chips: 1=20
cfi=5Fcmdset=5F0002: Disabling erase-suspend-program due to code brokenne=
ss.=20
quoted hunk ↗ jump to hunk
NS4 flash bank 0: Using static image partition definition=20
Creating 5 MTD partitions on "NS4 Bank 0":=20
0x00000000-0x00100000 : "U-Boot"=20
0x00100000-0x00200000 : "kernel"=20
0x00200000-0x00500000 : "initrd"=20
0x00500000-0x00b00000 : "jffs2"=20
0x00b00000-0x01000000 : "Spare"=20
=20
--- cut out insignificant rest of console output  ---=20
=20
=20
Now I have a brand new SanDisk 1GB Industrial Grade card that is=20
giving me a problem.  Here is what happens=20
with exactly the same u-boot and kernel versions, just this new CF=20
card plugged in instead of the older one.=20
=20
U-Boot 1.1.2 (Dec  2 2004 - 16:01:06)=20
=20
CPU:   MPC5200 v1.2 at 396 MHz=20
       Bus 132 MHz, IPB 66 MHz, PCI 33 MHz=20
Board: Marel NS4=20
I2C:   85 kHz, ready=20
DRAM:  128 MB=20
FLASH: 16 MB=20
In:    serial=20
Out:   serial=20
Err:   serial=20
Net:   FEC ETHERNET=20
IDE:   Bus 0: OK=20
  Device 0: Model: SanDisk SDCFBI-1024 Firm: HDX 2.15 Ser#:=20
111515L1004P3254=20
            Type: Hard Disk=20
            Capacity: 977.4 MB =3D 0.9 GB (2001888 x 512)=20
=20
Type "run flash=5Fnfs" to mount root filesystem over NFS=20
=20
Hit any key to stop autoboot:  0=20
Using FEC ETHERNET device=20
TFTP from server 10.100.1.30; our IP address is 10.100.50.68=20
Filename 'mpc5200/uImage'.=20
Load address: 0x200000=20
Loading:=20
#################################################################=20
#################################################################=20
         #############################=20
done=20
Bytes transferred =3D 810417 (c5db1 hex)=20
## Booting image at 00200000 ...=20
   Image Name:   Linux-2.4.25=20
   Created:      2004-12-03  11:35:18 UTC=20
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)=20
   Data Size:    810353 Bytes =3D 791.4 kB=20
   Load Address: 00000000=20
   Entry Point:  00000000=20
   Verifying Checksum ... OK=20
   Uncompressing Kernel Image ... OK=20
Memory BAT mapping: BAT2=3D128Mb, BAT3=3D0Mb, residual: 0Mb=20
Linux version 2.4.25 (jonb@tux.marel.is) (gcc version 3.2.2 20030217
(Yellow Dog=20
 Linux 3.0 3.2.2-2a=5F1)) #4 F=F6s Des 3 11:34:35 UTC 2004=20
On node 0 totalpages: 32768=20
zone(0): 32768 pages.=20
zone(1): 0 pages.=20
zone(2): 0 pages.=20
Kernel command line: root=3D/dev/nfs rw nfsroot=3D10.100.1.30:
/opt/eldk/ppc=5F82xx ip=3D=20
10.100.50.68:10.100.1.30:10.100.254.254:255.255.0.0:ns4b:eth0:off=20
panic=3D1=20
Calibrating delay loop... 263.78 BogoMIPS=20
Memory: 127080k available (1396k kernel code, 464k data, 76k init, 0k=20
highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)=20
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)=20
Mount cache hash table entries: 512 (order: 0, 4096 bytes)=20
Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)=20
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)=20
POSIX conformance testing by UNIFIX=20
PCI: Probing PCI hardware=20
Linux NET4.0 for Linux 2.4=20
Based upon Swansea University Computer Society NET3.039=20
Initializing RT netlink socket=20
Starting kswapd=20
Journalled Block Device driver loaded=20
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.=20
i2c-core.o: i2c core module version 2.6.1 (20010830)=20
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)=20
pty: 256 Unix98 ptys configured=20
ttyS0 on PSC1=20
ttyS1 on PSC2=20
ttyS2 on PSC3=20
PCF8563 Real-Time Clock Driver $Revision: 1.3 $ wd@denx.de=20
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize=20
loop: loaded (max 8 devices)=20
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4=20
ide: Assuming 33MHz system bus speed for PIO modes; override with=20
idebus=3Dxx=20
Port Config is: 0x91050404=20
ipb=3D66MHz, set clock period to 15=20
GPIO config: 91050404=20
ATA invalid: 00800000=20
ATA hostcnf: 03000000=20
ATA pio1   : 100a0a00=20
ATA pio2   : 02040600=20
XLB Arb cnf: 80002006=20
mpc5xxx=5Fide: Setting up IDE interface ide0...=20
Probing IDE interface ide0...=20
hda: SanDisk SDCFBI-1024, ATA DISK drive=20
hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x7f)=20
ide0: unexpected interrupt, status=3D0x00, count=3D1=20
=20
Here the boot process fails and the kernel hangs without further=20
messages to the console.=20
=20
Actually I did get one bootup with this 1 GB SanDisk Industrial=20
Grade card that succeeded  without this happening, where the card seemed =
to be
properly identiified, but I have not been able to repeat that.=20
=20
Does anyone have a clue what might be causing this ?=20
=20
=20
Thanks,=20
Jon Benediktsson=20
Marel hf.=20
Related discussions
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help