Hi,

please have a look at "Getting started with U-Boot and ML300" 
http://www.xilinx.com/bvdocs/appnotes/xapp542.pdf that describes how to 
use U-Boot with Xilinx Virtex-II Pro devices.

You might also want to have a look at the README.ml300 in the u-boot 
source tree that provides a quick start.

- Peter


grave wrote:

Hi,

We re starting a disign with xilinx chip Virtex II pro and I wonder 
the  typical size of an uboot binary. This is for our electronician 
disigner  in order to dimension the prom and so on...

Any hint welcome,

Thanks in advance, xavier grave

_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded