Re: Kernel oops when initializing ethernet driver

Hi,

quoted

I don't even know if we have the VHDL source - the peripherals are
ready-to-go logic units that are just inserted in the FPGA design.

Do you use EDK to build your design?

Yes.

Is the physical address in your log the one you expect?

Yes.

Apparently, the hardware guy disabled the ethernet controller's "S/W reset"
option in the EDK. This explains why the PPC got no ACK from OPB when
writing to the reset register, and threw the data check exception. I hope
that this problem is solved, when we enable that option.

Thanks again to all who replied,
Patrick


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/