Re: [patch]Make 2.6.7 kernel "make uImage" work for RPXlite DW

In message [ref] you wrote:

I found that the current 2.6.7 kernel "make uImage"
can make pass but didn't work with U-Boot on RPXlite
DW board.This fault is about bd_t,a FAQ in
DULG-13.2.5.Linux hangs after uncompressing the
kerne.So I make a patch against bk linuxppc-2.5 tree
as following.Wolfgang,could you check it?

Sorry, I cannot. I don't have write permision on the  BK  trees.  Try
submitting a patch to this list oand/or the maintainers.

1.Why 2.6.x kernel still use ppcboot.h rather than
u-boot.h?Anyway,ppcboot is a past thing.

You are right. Probably nobody bothered to submit a patch.e

2.Could <asm/ppcboot.h> include in rpxlite.h or
<BOARD.h> to replace bd_t a better idea all the time?

Don't assume that everybody wants to use U-Boot. Maybe this  should be
made dependent on CONFIG_UBOOT like they did for the 5200 [in 2.4].

Best regards,

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
"We all agree on the necessity of compromise. We just can't agree  on
when it's necessary to compromise."
                - Larry Wall in  [off-list ref]

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/