Re: PCILynx driver on big-endian

 On Sat, Mar 06, Ben Collins wrote:

quoted

pcilynx0: remapped memory spaces reg 0xd2222000, rom 0xd225d000, ram 0xd223b000, aux 0xd224c000
Machine check in kernel mode.
Caused by (from SRR1=41030): Transfer error ack signal
Oops: machine check, sig: 7 [#1]
NIP: D2234164 LR: D2235BC0 SP: CB081B10 REGS: cb081a60 TRAP: 0200    Not tainted
MSR: 00041030 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = cf44da00[5313] 'modprobe' Last syscall: 128
GPR00: 82000000 CB081B10 CF44DA00 FFFFFFFF 00000200 00000000 00000002 019D6412
GPR08: 01A68BD1 D2222F0C 00000000 D2222000 C0290000 1001CDE0 00000001 00000000
GPR16: 00000000 00000000 00000000 10001744 100189E0 100161CC 00000000 00000001
GPR24: 10019400 00000000 00000000 CB00C000 00000005 C1878C00 00009032 CB00DC8C
Call trace:
 [d2235bc0] add_card+0x358/0xa4c [pcilynx]
 [c00d58f0] pci_device_probe_static+0x64/0x80
 [c00d595c] __pci_device_probe+0x50/0x70
 [c00d59ac] pci_device_probe+0x30/0x60
 [c00f8e70] bus_match+0x50/0x8c
 [c00f8ff0] driver_attach+0x88/0xc8
 [c00f9388] bus_add_driver+0xa4/0xf4
 [c00f981c] driver_register+0x30/0x40
 [c00d5c3c] pci_register_driver+0x70/0xac
 [d213f024] pcilynx_init+0x24/0xd0 [pcilynx]
 [c0033824] sys_init_module+0x1ac/0x33c
 [c000794c] ret_from_syscall+0x0/0x4c

Hmm, I don't see this at all.

Did the pcilynx driver ever work on ppc?
The B&W G3 Macs have an onboard Opti chip, I doubt it ever worked.

Its better to hide it.


Index: Kconfig
===================================================================

--- Kconfig	(revision 1233)
+++ Kconfig	(working copy)

@@ -72,7 +72,7 @@

 config IEEE1394_PCILYNX
 	tristate "Texas Instruments PCILynx support"
-	depends on PCI && IEEE1394 && I2C
+	depends on PCI && IEEE1394 && I2C && !PPC_PMAC
 	select I2C_ALGOBIT
 	help
 	  Say Y here if you have an IEEE-1394 controller with the Texas


--

USB is for mice, FireWire is for men!

sUse lINUX ag, nÜRNBERG

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/