In message <002601c454f4$13e589a0$ee00a8c0@CAT> you wrote:

quoted

Note that the GDB in our ELDK not only supports the BDM4GDB, but also
the wiggler ...

So I could use a wiggler and GDB from ELDK with MPC5200?

No, sorry if I gave you a wrong idea.

So far we can only support the BDM interface; to implement  interface
software  for  the  JTAG/COP  port  as  used  on  60x  based  systems
(including the MPC5200) you need special documentation from Motorola,
which is only available under a pretty strict NDA. The terms of  this
NDA  prevent any open source implementation, so we cannot add this to
GDB.

I've been asked to try to avoid buying a BDI2000 for now :(

What a silly question ;-)

I already have the Greenhills slingshot and Metrowerks Wiretap from the
5200lite kit but they seem to be paper weights without their (expensive)
integrated software tools...

Indeed.

Just go ahead and buy a BDI2000...

Best regards,

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
Contrary to popular belief, thinking does not cause brain damage.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/