[PATCH][RFC] Make /proc/interrupts show the correct edge/level status for PReP machines

Although the edge/level status of the interrupts are set up correctly
for PReP machines, we neglect to set the status in the irq_desc
array.  This patch does that.

Before:

           CPU0
  2:          0   i8259     Edge      82c59 secondary cascade
  4:        876   i8259     Edge      serial
 15:       1202   i8259     Edge      sym53c8xx, eth0

Before:

           CPU0
  2:          0   i8259     Edge      82c59 secondary cascade
  4:     171211   i8259     Edge      serial
 15:    5153584   i8259     Level     sym53c8xx, eth0


diff -urNX .diffex linux-2.6.6-prev/arch/ppc/platforms/prep_pci.c
linux-2.6.6/arch/ppc/platforms/prep_pci.c

--- linux-2.6.6-prev/arch/ppc/platforms/prep_pci.c	2004-06-12

10:26:18.000000000 +0100

+++ linux-2.6.6/arch/ppc/platforms/prep_pci.c	2004-06-12

10:35:20.000000000 +0100

@@ -1051,11 +1051,18 @@
 		}
 	} else if ( _prep_type == _PREP_IBM ) {
 		unsigned char irq_edge_mask_lo, irq_edge_mask_hi;
+		unsigned short irq_edge_mask;
+		int i;

 		setup_ibm_pci(&irq_edge_mask_lo, &irq_edge_mask_hi);

 		outb(inb(0x04d0)|irq_edge_mask_lo, 0x4d0); /* primary 8259 */
 		outb(inb(0x04d1)|irq_edge_mask_hi, 0x4d1); /* cascaded 8259 */
+
+		irq_edge_mask = (irq_edge_mask_hi << 8) | irq_edge_mask_lo;
+		for (i = 0; i < 16; ++i, irq_edge_mask >> 1)
+			if (irq_edge_mask & 1)
+				irq_desc[i].status |= IRQ_LEVEL;
 	} else {
 		printk("No known machine pci routing!\n");
 	 	return;

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/