Re: how to solve the problem!!

In message [ref] you wrote:

I have created jffs2 ,run flash_self:
the message is flowing:ot>run flash_self
Unknown command 'root=/dev/mtdblock3' - try 'help'

Well, there is a pretty clear message from U-Boot: it complains about
an "unknown command". Obviously  the  settings  in  your  envrionment
variables are broken.

...

mice: PS/2 mouse device common for all mice

I think your kernel configuration is a bit strange,  too.  You  don;t
have a PS/2 mouse connected to your RPXlite biard, or do you?

...

jffs_scan_flash(): Did not find even a single chunk of free space. This is
BAD!
jffs_scan_falsh():Free size accounting screwed
jfffs_scan_flash():free_chunk_size1 == 0xe00000, free_chunk_size2 == 0x0,
fmc->free_size == 0x0
JFFS: Failed to mount device 1f:03.

Disable JFFS in your kernel config if you don't intend to use it.

jffs2_scan_empty(): Empty block at 0x0000fffc ends at 0x00010000 (with
0x1985e002)! Marking dirty
jffs2_scan_empty(): Empty block at 0x0001fffc ends at 0x00020000 (with
0x1985e002)! Marking dirty
jffs2_scan_empty(): Empty block at 0x0002ffec ends at 0x00030000 (with
0x1985e001)! Marking dirty
jffs2_scan_empty(): Empty block at 0x0004ff90 ends at 0x00050000 (with
0x1985e002)! Marking dirty
jffs2_scan_empty(): Empty block at 0x0005fffc ends at 0x00060000 (with
0x1985e002)! Marking dirty
jffs2_scan_empty(): Empty block at 0x0006fffc ends at 0x00070000 (with
0x1985e002)! Marking dirty
jffs2_scan_empty(): Empty block at 0x0008fffc ends at 0x00090000 (with
0x1985e002)! Marking dirty
jffs2_scan_empty(): Empty block at 0x0009fffc ends at 0x000a0000 (with
0x1985e002)! Marking dirty
jffs2_scan_empty(): Empty block at 0x000afffc ends at 0x000b0000 (with
0x1985e002)! Marking dirty
jffs2_scan_empty(): Empty block at 0x000cfffc ends at 0x000d0000 (with
0x1985e002)! Marking dirty
jffs2_scan_empty(): Empty block at 0x000dfffc ends at 0x000e0000 (with
0x1985e002)! Marking dirty
jffs2_scan_empty(): Empty block at 0x000efffc ends at 0x000f0000 (with
0x1985e002)! Marking dirty
jffs2_scan_empty(): Empty block at 0x0010fffc ends at 0x00110000 (with
0x1985e002)! Marking dirty
jffs2_scan_empty(): Empty block at 0x0011fffc ends at 0x00120000 (with
0x1985e002)! Marking dirty
jffs2_scan_empty(): Empty block at 0x0012fffc ends at 0x00130000 (with
0x1985e002)! Marking dirty
jffs2_scan_empty(): Empty block at 0x0014fffc ends at 0x00150000 (with
0x1985e002)! Marking dirty
jffs2_scan_empty(): Empty block at 0x0019fffc ends at 0x001a0000 (with
0x1985e002)! Marking dirty
jffs2_scan_empty(): Empty block at 0x001afffc ends at 0x001b0000 (with
0x1985e002)! Marking dirty
jffs2_scan_empty(): Empty block at 0x001cfffc ends at 0x001d0000 (with
0x1985e002)! Marking dirty
jffs2_scan_empty(): Empty block at 0x001dfffc ends at 0x001e0000 (with
0x1985e002)! Marking dirty
jffs2_scan_empty(): Empty block at 0x001efffc ends at 0x001f0000 (with
0x1985e002)! Marking dirty

Seems you didn't initialize your root filesystem properly...

VFS: Mounted root (jffs2 filesystem) readonly.
Freeing unused kernel memory: 52k init
Warning: unable to open an initial console.

This is why?

Because you didn't install a proper root filesystem.

Best regards,

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
Condense soup, not books!

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/