April 2004

439 messages across 203 threads. The 100 most recently active threads.

Last	Thread	Replies
Friday 30 April
22:46	Motorola 5200 MIPS Mark Chambers	1
17:22	RE: i2c m41t11 or m41t81 driver Lokesh Kumar	none
15:47	rsync'ed sources out of date? Christian Kujau	2
15:46	Re: i2c m41t11 or m41t81 driver Wolfgang Denk	none
15:45	Re: bd_t definition changes Wolfgang Denk	none
13:18	i2c m41t11 or m41t81 driver lokesh kumar	none
12:59	bd_t definition changes Richard Danter	none
10:46	Configuring Both the FECs in MPC880: FEC driver Sanjeev R	1
10:44	JFFS2 problem when data cache enabled S. Hebbar	1
09:24	Unable to get SCC 4 working as a console port on a 8260ADS Stan Partridge	1
04:00	Using 2GB RAM kernel ppc-2.4.20 Raghu	none
Thursday 29 April
23:16	confused about HID1 bits and G5 Chris Friesen	6
22:57	MPC8560 FCCs Jason McMullan	1
20:24	i2c m41t81 driver Lokesh Kumar	none
17:52	mvme5100 setup Dietrich Pescoller	none
17:15	Re: ttyS1 on an MVME5100 unknown sender	none
16:31	Re: stack frame for interrupts/exceptions in PPC unknown sender	none
15:36	DOC2000 unstable problem!!! leo	1
14:54	ttyS1 on an MVME5100 Ton van den Broek	none
Wednesday 28 April
22:18	Ebony PPC440GP & linux 2.6.3 Brian Hawley	1
20:17	RE: Ebony PPC440GP & linux 2.6.3 Andrew Williams	none
17:41	stack frame for interrupts/exceptions in PPC Tameen Khan	2
16:04	Re: ioperm Wolfgang Denk	1
13:45	RE: Recognizing compact flash in IDE mode on 8260 Dixon, Myron @ GNS	none
07:28	Initrd and PPCbug, can it work? unknown sender	13
06:32	Recognizing compact flash in IDE mode on 8260 Dixon, Myron @ GNS	1
02:22	RE: FEC support for 8260 in kernel 2.4.25 Andrew Williams	1
Tuesday 27 April
23:23	RE: ppc405ep GPIO register mmap'ing invalid argument Kerl, John	none
23:21	RE: ppc405ep GPIO register mmap'ing invalid argument Kerl, John	none
23:19	RE: ppc405ep GPIO register mmap'ing invalid argument Kerl, John	none
22:57	ppc405ep GPIO register mmap'ing invalid argument Charles Frey	none
19:33	Re: ioperm Wolfgang Denk	2
18:39	826x FCC ethernet in promiscuous mode Rune Torgersen	none
15:59	ioperm Sergey Urvanov	1
15:52	Re: High resolution timer in driver Wolfgang Denk	1
09:49	RE: ioperm Fillod Stephane	none
07:51	ioperm Sergey Urvanov	none
07:38	Debugging deadlocks using SV semaphores via PROC FS Steffen Rumler	none
06:09	Peripherel support for MPC880 Sanjeev R	none
01:53	405GP booting question Frank Yang	none
Monday 26 April
22:24	RE: FW: Code Clean-Up Andrew Williams	1
22:17	zImage.chrp broken in 2.6.5, patch provided, please someone apply it. Sven Luther	2
21:22	FW: Code Clean-Up Andrew Williams	1
21:21	Re: libjpeg David Ho	none
20:18	looking for Gary Thomas black desmo	none
18:33	Re: libjpeg Wolfgang Denk	1
17:11	Serial Driver and IRQ0 Phil Thompson	1
17:09	Re: MPC880 and ELDK Wolfgang Denk	1
16:41	E1/T1 on mpc8260. Omanakuttan	1
11:28	PPC440GX GigE support Matt Porter	1
10:45	PPC Linux painic problem! jeffy	3
03:19	What are the files under these dir.have to download? Vijay	none
Sunday 25 April
08:32	FEC support for 8260 in kernel 2.4.25 T Michael Turney	3
Saturday 24 April
05:16	question about 8241 again llee	1
02:46	jffs2 problem aa aaa	none
01:13	Guidance Request Regarding openpic_hookup_cascade() Randy Vinson	1
Friday 23 April
12:07	Re: U-Boot Problem (MPC8260) Wolfgang Denk	none
11:37	Need help booting linux on my 8265 board liuming	2
10:24	Re: MPC8260 Hang Wolfgang Denk	none
07:50	Re: MPC880 and ELDK Sanjeev R	none
07:01	MPC8260 Hang challaharikumar	none
06:31	Physical Memory map holes in PPC Tameen Khan	1
04:22	MPC880 and ELDK Sanjeev R	none
01:42	Re: which is the best root File system in embed linux system? jeffy	none
Thursday 22 April
19:42	Re: ADS8260 Hang Wolfgang Denk	none
16:08	RE: good learning experience for Linux Steven Blakeslee	none
15:58	good learning experience for Linux Steven Blakeslee	1
13:54	ADS8260 Hang challaharikumar	1
13:13	anyone ever see "swap_dup: Bad swap file entry"? Steven Blakeslee	none
12:52	RE: Re: Re: which is the best root File system in embed linux system? VanBaren, Gerald (AGRE)	none
09:39	Re: Re: Re: which is the best root File system in embed linux system? Wolfgang Denk	none
08:57	Question about process/kernel address space Stefan Nickl	1
08:44	Re: Re: which is the best root File system in embed linux system? jeffy	none
06:30	Re: PCMCIA problem help! yhxing	none
06:25	Re: jffs2 problem help! Wolfgang Denk	none
06:21	Re: PCMCIA problem help! Wolfgang Denk	none
03:04	Re: Re: PCMCIA problem help! yhxing	none
01:26	jffs2 problem help! aa aaa	none
Wednesday 21 April
23:02	asm code Chris Friesen	3
18:42	GCC and Linux for Motorola's MPC8540ADS Patrick Pelgrims	2
17:00	Re: which is the best root File system in embed linux system? Wolfgang Denk	none
16:58	Re: PCMCIA problem help! Wolfgang Denk	none
15:32	which is the best root File system in embed linux system? leo	none
14:15	MPC8245's I2C support on linux kernel unknown sender	1
09:04	PCMCIA problem help! yhxing	none
Tuesday 20 April
21:40	Re: GCC and Linux for Motorola's MPC8540ADS Wolfgang Denk	none
21:39	Re: Unable to boot Linux 2.4.24 on a custom board similar to 8260ADS Wolfgang Denk	none
21:30	[Patch] i2c-algo-8240.c: no ack in m8240_readbytes() unknown sender	none
16:58	Unable to boot Linux 2.4.24 on a custom board similar to 8260ADS Stan Partridge	none
16:48	atyfb Framebuffer driver Marius Groeger	none
10:48	console terminal on mpc8xx Wojciech Kromer	none
01:45	fail to disable MMU on ppc 8241 llee	2
01:02	Re: System ACE MPU interface to CF card Stephen Williams	8
Monday 19 April
22:13	PREEMPT problems Colin LEROY	18
20:55	Re: ppc4xx_find_bridges( ) hangs kernel on Xilinx ML300 (PCI)] Mike Wellington	none
19:47	Linux/Fibre Channel on ML300 question. Mike Wellington	none
16:42	RE: MPC852 Cache initializing problem Steven Blakeslee	none
15:56	MPC852 Cache initializing problem Meriin Michael-BMM063	none
11:23	MPC85xx support Gerrit Van de Velde	7
10:21	Re: Need help booting linux on my 8265 board Wolfgang Denk	none

`h`	back out one level
`j`	next message in thread / next series-diff position
`k`	previous message in thread / previous series-diff position
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help