Re: Some questions regarding - ppcbug booting

Hager, Johannes, HRD/AB wrote:

I´m working on a similar project, but my problem is, that I can´t
get the kernel, I´ve compiled, working. How do I have to compile the
kernel/which options do I have to set, that it can be started with
motorolas PPCBug? Which commands do I have to use to boot the Kernel
with the PPCBug. Until now I used NBO, but I always got an error
message! I am using the MVME3604 board.

quoted

-----Ursprüngliche Nachricht-----
Von:	David Gardiner [SMTP:daveg@sonartech.com.au]
Gesendet am:	Mittwoch, 25. Februar 2004 00:25
Betreff:	ppcbug booting

I'm currently running Linux system (linuxppc_2_4 from monta vista,
thanks to all those who have worked on it) that comprises of a
motorolla mvme5100 that has a promise ide pmc with a compact flash and
was hoping to get the compact flash to hold the entire OS+kernel ...
At the moment the system can be booted via nfs / prep boot (if running
with a scsi disk) and bugboot. But what I was hoping to do was boot
of a kernel on the compact flash. My assumption is that using u-boot
to do this would be a heavy handed approach (please point out if I'm
wrong) and I haven't seen anything in my googling. Has anyone ever
tried anything like this? if not can I please get some pointers on the
best way to go about this.

Maybe a bit of broad question but I'll try to answer some bits,mainly
the ppcbug

To ppcbug boot, I use the bugboot kernel which when compiled is at:
arch/ppc/boot/images/zImage.bugboot
it is just the normal kernel wrapped up with some extra bits, which is
done by a binary found in:
linux/arch/ppc/boot/utils/mkbugboot

To get this onto the machine, in ppcbug I setup niot to tftpboot the
kernel image onto the machine, to the location specified by:
Boot File Load Address         =
which is done using:
nbh

I then pflash(which is basically a copy) this to a different location:
i.e. pflash from:(from+lgth) to

I then use ppcbug's env command to set it to rom boot the kernel,
the bits, I know you have to change are:
Network PReP-Boot Mode Enable [Y/N] = N
ROM Boot Enable [Y/N]            = Y?
and the address,
ROM Boot Direct Starting Address = ....
is the address that you pflashed the kernel to

ps: the addresses that I use have been left out purposly (as they might
not be right for your machine) and I would like to note it's pretty easy
to stuff up a machine using the ppcbug if you use the "wrong" addresses
(speaking from experience).

also take a look at Mat Porters, description which is at:
http://www.debian.org/ports/powerpc/inst/prep

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/