Re: ppcbug booting

On Wed, Feb 25, 2004 at 10:24:54AM +1100, David Gardiner wrote:

Hi All,

I'm currently running Linux system (linuxppc_2_4 from monta vista,
thanks to all those who have worked on it) that comprises of a motorolla
mvme5100 that has a promise ide pmc with a compact flash and was hoping
to get the compact flash to hold the entire OS+kernel ... At the moment
the system can be booted via nfs / prep boot (if running with a scsi
disk) and bugboot. But what I was hoping to do was boot of a kernel on
the compact flash. My assumption is that using u-boot to do this would
be a heavy handed approach (please point out if I'm wrong) and I haven't
seen anything in my googling. Has anyone ever tried anything like this?
if not can I please get some pointers on the best way to go about this.

You can't do this from PPCBUG's PBOOT command.  It only knows about
on-board IDE interfaces (on the MCG boards that have IDE on-board) and
any SCSI interfaces. You need new firmware (u-boot), a secondary bootloader
(to use via bugboot), or something like boot image to switch kernels
without rebooting through the firmware.  Your best bet is the first
option, do it right and port/put u-boot on the board.

-Matt

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/