Thread (4 messages) flat view 4 messages, 2 authors, 2003-10-03

Re: Queston about Walnut

From: Jacky Lam <hidden>
Date: 2003-10-03 04:11:06

        I trace the code in kernel and I found some strange behaviors.
        In the first case (using walnut_config provided in kernel source),
kernel hangs at mapin_ram();
        However, if I turn off all unnecssary options and leave only serial
console, my kernel can run until init/main.c: kmem_cache_init();

        As both hangs in memory related function, I tried to run a memory
test on my board in u-boot. But it hangs.

        => mtest 0 3ffffff
        Pattern 00000000  Writing...
        <hangs>

    I tried smaller range (ffffff), it still hangs.

    I am sure my board's memory is in good condition because VxWorks can run
very well on it. Have any idea? Thanks.

Best regards,
Jacky





----- Original Message -----
From: "Wolfgang Denk" <redacted>
To: "Jacky Lam" <redacted>
Cc: <redacted>
Sent: Thursday, October 02, 2003 8:17 PM
Subject: Re: Queston about Walnut

In message <000e01c388dc$eb525510$0202a8c0@homevl9biy3v7e> you wrote:
quoted
quoted
Who gave you such (obviously wrong) instructions?
        I take the example of u-boot to create the "uImage" and download
it
quoted
to the board.
Please show me which U-Boot document uses 0x00400000 as load or entry
point address so I can fix this immediately. It is WRONG  and  CANNOT
work.
quoted
quoted
For PowerPC systems, both  Load  Address  and  Entry  Point  must  be
specified as 0.
        I have tried 0 before. But I get an exception in return. Could
you
quoted
kindly give me some instructions how to run a kernel on this board?
Please start by giving a precise description of  what  you  did.  and
which error messages you got.

You "get an exception" - when? When running "mkimage"?  When  booting
the kernel? Which sort of exception? What is the exact error message?
Please include a complete log of your actions and all output.

Best regards,

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
Totally illogical, there was no chance.
-- Spock, "The Galileo Seven", stardate 2822.3

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help