Hello,
Its been a little while since I've looked at the GT64260 manual,
but I believe you configure the MPP pins as interrupt pins. These
then are masked/seen via the GPP_INTR_CAUSE (0xf108) and
GPP_INTR_MASK (0xf10c) registers. Then, I believe that somewhere in
the CPU's mask, you can enable/disable the GPP/MPP interrupts.
This is what I recall from memory, but hopefully it'll get you
started.
Paul White
Senior Enginer, Software
Bivio Networks, Inc.
http://www.bivio.net
On Wed, 27 Aug 2003, [ks_c_5601-1987] ½Å°æ¼ö wrote:
I have a custom MPC7410 + GT64260 board and
I successfully ported linux to that board.
Now, I am trying to handle the mii interrupt.
The MII INT Line is connected to MPP 14, 15.
How to handle that interrupt or where I can find
out the example for external interrupt with MPP
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/