Re: PPCBoot on Ebony board
From: Chris Zimman <hidden>
Date: 2003-07-15 21:32:54
On Tue, Jul 15, 2003 at 02:11:07PM -0400, Brian Padalino wrote:
I am trying to transfer PPCBoot that I had compiled over a tftp session in the 440GP 1.18 ROM Monitor (02/11/02) that came on the Ebony board. Is that the wrong method of trying it? I tried using both serial ports and Kermit with Xon/Xoff handshaking, but it just ended up timing out. I keep getting the error: Loading file "C:\ppc\bootp\boot.img" ... Sending tftp boot request ... Not a valid boot image file Which stems from an improper magic number at the top of the file to say it's a valid boot image.
This is not going to work. You want to program PPCBoot into flash via a flash programmer or via JTAG. --Chris ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/