Re: MPC8260 ATM channel allocation.

 MPC8260 supports 255 internal chans and 64k external
for each FCC. (There is no sharing among resources).
Thats the same for the BDs.
 ATM switching has not been implemented for the 8260
(as far as I know). Alex has implemented one for 860.
You could import that (switcher.c). So you will have
to open 1 bidirectional channel for each FCC.

               Hope this helps
                   Dimitris.

--- Sanjay Kumar <skumar@giga-stream.de> wrote:

Dear all,

I am using MPC8260 for ATM cell switching between
FCC1 and FCC2.I have two
UTOPIA interface connected,one each to FCC1 and
FCC2.FCC1 is connected 16
PHY devices and FCC2 is connected 2 PHY devices.I
have following
questions.
1.MPC8260 supports 255 internal channels and upto
64k using external
memory. Does this number of channels(upto 64k) are
for both FCC1 and FCC2
? If yes how these channels can be distributed
between FCC1 and FCC2. For
transfering ATM cells from FCC1 to FCC2 and
vice-versa I have to open an
input channel on FCC1 and an output channel on
FCC2.Does this input and
output channel number should be unique?

2. MPC8260 limits 256k for RX BDs(buffer
descriptors) and 256k for TX BDs.
Does this limitation is per FCCs ? I mean can I
allocate 256k RX BDs and
256K TX BDs for FCC1 and then
256k RX BDs and 256K TX BDs for FCC2?

Any idea....

regards,
sanjay

==============================================================

 Sanjay Kumar
skumar@giga-stream.de
 GIGA-STREAM UMTS Technologies GmbH  Tel: +49
(07243) 94976-119
 Im Ermlisgrund 8                    Fax: +49
(07243) 94976-100
 76337 Waldbronn

==============================================================

=====
------------------------------------------------------------
-Dhmhtrios Meidanis
-Degree in Mathematics, University of the Aegean.
-Master in Computer Architecture and Digital
 Systems, University of Crete.
 Greece.
------------------------------------------------------------


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/