Re: PCI DMA memory problem

On Tue, Jun 24, 2003 at 09:01:21PM +0200, Oliver Amft wrote:

I am implementing a network driver for a DMA device on a custom
405GP/GPr based board. The networking device is attached over PCI bus.
Kernel is currently 2.4.21. BIOS is PPCBoot 1.2.0.

To map the data buffers from skb the driver uses pci_map_single(). When
starting the kernel with SDRAM size configurations other than 32MByte
the device is unable to transfer data (currupted data) - descriptor
dword read/write-back works (set up with pci_alloc_consistent()). For
the kernel start option mem=32MB everything is fine (descriptor +
correct data).

My first thought is -- is/are the SDRAM bank(s) configured correctly?

I don't know that it'd necessarily be related, but for the 405GP,
PPCBoot 1.2.0 doesn't have the PCI bridge setup quite right for all
PCI devices (eg. 82559 won't work).  I have code to fix the bridge
setup if you need it -- although I'm not even certain they exist in
the GPR.

--Chris

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/