Re: kermit:How to disable the flow control signals?

Hi,

in message [ref] you wrote:

quoted

Ummm... why do you bother? Is anything not working?

Yes,my console still outputs nothing,even not a single word.

Maybe your target does not output  anything  (at  least  not  at  the
expected baudrate) ?

So,I must first make sure it's not my console emulator's problem.

Test with a known to work device first.

So there is no money for something like BDI.

You pay anyway - either with money for the BDI,  or  with  your  time
when you try to do without it.

As u mentioned before,I will read u-boot source,maybe it's a way of continue
my
work.Would u give me a clue of uboot,I mean the sequence of boot and the
according
source file?I didnot find this kind of infomation on the internet.

Booting starts at the reset vector, i. e. at _start in cpu/*/start.S

But this is off topic here. Follow-up to u-boot-users, please.


Best regards,

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
One does not thank logic.
	-- Sarek, "Journey to Babel", stardate 3842.4

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/