Re: 405GPr support in linux2.4.18

At 02:11 AM 2/18/2003, Laurent Mohin wrote:

I'm designing a board with 405GP processor. I'm now trying to have it
working with a 405GPr version.
I've started to configure it working in legacy mode and made the necessary
changes in PPCBoot.

Once downloaded, my kernel hung in early_init function when it called the
memset_io to zero the BSS. Using a BDI2000 debugger, I saw that I've
reached the bad_page_fault function.

The only difference I know between 405GP and 405GPr in legacy mode is data
cache size. How does the kernel manage it?

We successfully run 405GPr based board (in legacy mode) with the _same_
kernel we used for 405GP.
We don't use any 405GPr specific features though.

As far as I understand, the only function which depends on the data cache
size is flush_dcache_all in (arch/ppc/kernel/misc.S).
But it already handles the worst case which is 440GP (32K), so no change is
needed for 405GPr.

Eugene


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/