Re: Trying to use ELDK to build Ebony/440GP

On Thu, Jan 30, 2003 at 01:02:59PM -0800, brian.auld@adic.com wrote:

Matt,

Thanks for the response. I was pretty surprised myself and to say the least
am not having a very good day.

Regarding the linuxppc_2_4_devel build attempt, these were the steps I took:

In fact, I'm going to run it again on my linux box as I regurgitate the
steps I previuosly took:

Prerequisites:
==============
- running RH8.0
- ELDK 2.0.2 installed with ppc_4xx tool chain (check)
- linuxppc_2_4_devel obtained from monte vista mirror (check)
(1) top-level Makefile hacked to read:
    - ARCH := ppc
    - CROSS_COMPILE = ppc_4xx-
(1) make mrproper
(2) make ebony_config
(3) make oldconfig
    - I accept default(s) for about 10 options I'm prompted for.
(4) make dep
(5) make zImage

When I run make zImage, I get the following error message:

/opt/eldk/usr/src/linuxppc_2_4_devel/include/linux/kernel.h:10: stdarg.h: No
such file or directory

Interesting, it's not picking up stdarg.h from down in the gcc-lib/
hierarchy.  Probably an ELDK install problem...hopefully Wolfgang
is reading this thread since he should have a suggestion on what have
might gone wrong with your installation.

Regards,
--
Matt Porter
porter@cox.net
This is Linux Country. On a quiet night, you can hear Windows reboot.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/