Re: Ramdisk details; execve("/bin/sh") output

In message [ref] you wrote:

1. How can i see the contents of a ramdisk? I
downloaded one from denx and i want to see what is in
there?

1. [in case of PPCBoot image:] strip header
2. Uncompress
3. Mount using the loopback device

For example:

# dd if=simple-ramdisk.PPCBoot of=simple-ramdisk.gz bs=64 skip=1
8874+1 records in
8874+1 records out
# gunzip simple-ramdisk.gz
# mount -o loop simple-ramdisk /mnt
# ls -lR /mnt
/mnt:
total 17
drwxr-xr-x    2 root     root         1024 Jun  4  1999 bin
drwxr-xr-x    2 root     root         1024 Oct  2  2000 dev
drwxr-xr-x    2 root     root         1024 Jun  4  1999 etc
drwxr-xr-x    2 root     root         1024 Jun  4  1999 lib
-rwxr-xr-x    1 root     root          136 Jan 11  1999 linuxrc
drwxr-xr-x    2 root     root        12288 Jun  4  1999 lost+found

/mnt/bin:
total 463
-rwxr-xr-x    1 root     root        37480 Mar  1  1998 date
-rwxr-xr-x    1 root     root        54584 Sep  8  1998 ls
-rwxr-xr-x    1 root     root       375704 Sep  8  1998 sh

/mnt/dev:
total 0
crw-r--r--    1 root     root       5,   1 Mar 22  2000 console
crw-rw-rw-    1 root     root       5,   0 Jun  4  1999 tty
crw-rw-rw-    1 root     root       4,  64 Jun  4  1999 ttyS0

/mnt/etc:
total 0
-rw-r--r--    1 root     root            0 Jan 11  1999 mtab

/mnt/lib:
total 1042
-rwxr-xr-x    1 root     root        83138 Apr 24  2001 ld.so.1
-rwxr-xr-x    1 root     root       825404 Sep  8  1998 libc-1.99.so
-rw-r--r--    1 root     root        53356 Jan 11  1999 libcrypt.so.1
lrwxrwxrwx    1 root     root           12 Jun  4  1999 libc.so.6 -> libc-1.99.so
-rw-r--r--    1 root     root        61586 Jan 11  1999 libproc.so.1.2.6
lrwxrwxrwx    1 root     root           19 Jun  4  1999 libtermcap.so.2 -> libtermcap.so.2.0.8
-rwxr-xr-x    1 root     root        30152 Sep  8  1998 libtermcap.so.2.0.8

/mnt/lost+found:
total 0
#

2. In ${LINUX_ROOT}/init/main.c -> init(), after
prepare_namespace (which basically does the inintrd
mount), open syscall on '/dev/console' fails. But
still control goes further and executes
'execve("/bin/sh")'. My question is where does the
output of /bin/sh execution goes? Not to my dumb
terminal? I see nothing. Infact my dumb terminal just
stops there. No kernel panic. Any clues?

Solve problems sequentially. Why does open '/dev/console' fail ?

Note: In my case i do not have enough infrastructure
to have the  standard NS16550 is working. So i have to
port some other driver as my serial driver. ANything
related to this?

There may be some other problems. Sorry for  being  vague  -  I'm  as
precise  as you are with your statement about "some other driver". If
you want helpful answers you must provide all the little details.


Best regards,

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
"Probably the best operating system in the world  is  the  [operating
system] made for the PDP-11 by Bell Laboratories."
                                           - Ted Nelson, October 1977

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/