Re: 823 Video Controller Driver - where ?

In message <D73A25AA6E54D511AD74009027B1110F3C0500@ORION> you wrote:

I appologize, you are correct.  I sometimes think of LCD and video as the
same because I worked with a Lynx chip that allows both LCD and Video out
from the same buffer.  Is it possible to use the 8xx LCD driver to drive the
video out?  I believe the only section that needs to be changed is the
function that initializes the LCD registers, I may be off though.

It's more complicated, since the video controller will not support  a
plain framebuffer, but only YUYV video mode.

What happened to the video driver for the EP boards? It was available
once on MV's FTP server - does not even EP has a copy any more?

[Asking just out of curiousity, as we've  already  reimplemented  all
the stuff we needed - no NTSC support yet, though].

Best regards,

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
As far as we know, our computer has never had an undetected error.
		                                           -- Weisert

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/