Re: ifconfig: SCC1 enet0 not showing up
From: Wolfgang Denk <hidden>
Date: 2002-12-18 16:43:12
In message <DB0585C9F6F9D411BE8F00D0B7896A4CC05F4E@SNCMAIL> you wrote:
My Ethernet is not showing up ... I have compiled in enet support ... fixed my port pins ... but when I do ifconfig I see only:
Probably you did not configure the network interface at all?
At start my enet scc is configured properly ... I am pretty sure because I see: ## Transferring control to Linux (at address 00000000) ... Linux version 2.4.20-pre8 ... Kernel command line: root=/dev/ram rw ip=192.168.104.101:192.168.103.151:192.168.104.1:255.255.255.0:BigMoney::off
From this command line I suspect that you intend to use IP
autoconfiguration, but then... ...
CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set
^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ...then you don't enable IP autoconfiguration in the kernel, so you will have to manually configure the interface. I guess you want to define CONFIG_IP_PNP ... Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de Why is an average signature file longer than an average Perl script?? ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/