RE: ifconfig: SCC1 enet0 not showing up

quoted

quoted

eth0: CPM ENET Version 0.2 on SCC1, 00:22:2e:ff:67:de
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize

1. cat /proc/net/dev
   If eth0 is listed then it is installed in the kernel

2. have you tried to configure the ethernet by hand?
   ifconfig eth0 192.168.1.10

   Then run ifconfig and see if it shows up.

3. If this works, you can go back and correct your bootline parameters.

Better yet, set CONFIG_IP_PNP in yor kernel configuration and
recompile it!

Or create an appropriate network configuration script for you installation.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/