Re: PWM on the MPC850

In message [ref] you wrote:

Does have any information regarding generating RC spec PWM signals using the
MPC850
that does not bog down the processor?  Also does anyone know how to expand

You can, to a certain degree, use the RISC timers to set up a  couple
of  PWM  channels  that run with zero CPU load (just some load on the
CPM). See the PWM driver (arch/ppc/8xx_io/pwm_8xx.c)  in  our  kernel
source tree.

But be warned: do NOT use any of the port B pins for I/O  in  such  a
setup. There is a race condition within all MPC8xx CPUs.

the number
of RS232 ports for the MPS850 from two to 2+.

Add one or more external  UARTs?  This  has  been  done  before  (for
example, we have a design with 2 x octal UARTs on a MPC8xx system).

Best regards,

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
An age is called Dark not because  the  light  fails  to  shine,  but
because people refuse to see it.           -- James Michener, "Space"

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/