Re: PrPMC800 interrupt problem
From: Tom Rini <hidden>
Date: 2002-10-24 17:26:42
On Thu, Oct 24, 2002 at 07:01:19PM +0200, Anders Blomdell wrote:
When trying to use the linuxppc_2_4_devel on a PrPMC800, the system stops responding to external interrupts after the first serial interrupt. Many things works, since the system correctly gets its IP address via DHCP. The system handles a little more than 100 interrupts that gets routed to 'e100intr', then it starts up my shell that does a write to the console. This write triggers an interrupt that gets routed to 'rs_interrupt_single' . After this no more interrupts are received, but 'rs_interrupt_single' is called from the timer task in the serial driver, but the ethernet is totally dead. Anybody that has a good idea what to do about this?
Did you update the prpmc800_openpic_initsenses[] table and related? (Look at how the lopec or sandpoint work now). -- Tom Rini (TR1265) http://gate.crashing.org/~trini/ ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/