Re: mpc8xx - power save modes - PIT

Patrick Mahoney wrote:

Hi Conn,

I apologize for sticking to the topic... Getting to doze low mode is
very important to our project...

You say you got the ppc version of the 2.4.19 kernel from
ftp.kernel.org... This can't be, since the latest available ppc patch
is for the 2.4.18 kernel...

So what kernel version/provider did you use your patch on?

Once again, thanks a lot...

Pat Mahoney

quoted

quoted

quoted

      I have played with some of the power saving modes on our custom
850 board and have had no problems. I have toyed with the Doze High and
Doze Low modes in the idle loop. Attached is a hacked up idle loop for
kernel 2.4.19 that works for me.

[...]

quoted

I forgot to mention my kernel source tree was directly from kernel.org

I got my kernel from ftp.kernel.org . I belive the patches to 2.4.18 were
submitted and included into 2.4.19 from ftp.kernel.org . I don't think there
has been an official patch released for 2.4.19 as of yet.

good luck,

	Conn
--

*****************************************************************
  If you live at home long enough, your parents will move out.
 (Warning they may try to sell their house out from under you.)
*****************************************************************

Conn Clark
Engineering Stooge				clark@esteem.com
Electronic Systems Technology Inc.		www.esteem.com


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/