Re: CS_BAD_VCC Error during Card Configaration.

Narendra wrote:

But as i found through debug message, socket is configured for
5volts and the CIS read from my card wants 3.3V. So my Config()
routine is failing since there is a mismatch in configured Vcc and
Requested Vcc. and Kernel is crashing.

You are using a 3.3V card in an 5V socket. If the card can do this - and
I think Prism 2 can - you  can bypass the code which checks if the Vcc
is correct. You will maybe find it if you look in the WLAN drivers
source code and search for conf.Vcc.


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/