Re: symbol card with orinoco_cs on mpc823

Dear all:

Thanks for all the help. I've found out the problem.
It's indeed a low-level problem. m8xx-pcmcia can't reconginize the io size
of this kind of card.
So i just manully set it to correct one. Then it works fine.

Thanks the authors. The two drivers are so great!

regards

----- Original Message -----
From: "Magnus Damm" <redacted>
To: "shaowei dai" <redacted>
Sent: Saturday, August 03, 2002 1:42 AM
Subject: Re: symbol card with orinoco_cs on mpc823

Try disabling the busmonitor if it's enabled.

/ Magnus

shaowei dai wrote:

quoted

Hello,

Has anybody tried orinodo_cs 0.11b or 0.12b with success on symbol
Spectrum24 High rate11M card on mpc platform?
I've tried 2.4.18-pre3 and 2.4.19-rc3 kernel with orinoco driver. It

works

quoted

fine with intersil card. But
when i try it on symbol card, it always crashes. After tracing down i

find

quoted

it is caused by hermes_init(). It seems the
call to hermes_write_regn(hw,INTEN,0)  cause the crash. The ksymoops

also

quoted

suggest this function. It is just an io write. What can be wrong? And

most

quoted

strange thing is why it doesn't cause any trouble in normal intersil

card.

quoted

Any ideas is greatly appreciate!

regards
David

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/