Re: symbol card with orinoco_cs on mpc823
flat view
From: David Gibson <hidden>
Date: 2002-08-02 06:23:24
On Fri, Aug 02, 2002 at 02:01:52PM +0800, shaowei dai wrote:
Hello, Has anybody tried orinodo_cs 0.11b or 0.12b with success on symbol Spectrum24 High rate11M card on mpc platform? I've tried 2.4.18-pre3 and 2.4.19-rc3 kernel with orinoco driver. It works fine with intersil card. But when i try it on symbol card, it always crashes. After tracing down i find it is caused by hermes_init(). It seems the call to hermes_write_regn(hw,INTEN,0) cause the crash. The ksymoops also suggest this function. It is just an io write. What can be wrong? And most strange thing is why it doesn't cause any trouble in normal intersil card.
That's wierd - it is just a register write, so this sounds like a low-level problem. Is something about the card confusing the PCMCIA system so it's reporting the wrong IO addresses? Or maybe the timing is a little bit different and something in the slot driver can't cope. -- David Gibson | For every complex problem there is a david@gibson.dropbear.id.au | solution which is simple, neat and | wrong. http://www.ozlabs.org/people/dgibson ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/