Re: 64 bit PCI qlogic + ebony + 440 kernel

On Mon, Jun 03, 2002 at 09:35:40PM -0000, sanjay k k wrote:

Hi,
I have 64-bit PCI qlogic adapter , which works fine with 405 as it
detects 32 bit on 405.
When i tried to run the same code on ebony board with current 440
kernel (development tree), it detects as a 32 bit PCI but gave all
junk data.

I've tested ~14 different PCI(X) cards that all run fine.  I've
got 64-bit conventional PCI gige and PCI-X gige cards running
at 66-133Mhz with no problems.

Make sure you have the Ebony pci bus speed jumpers and firmware
speed settings set properly for your card, it can be a little
touchy sometimes.

Do i need to change any thing in qlogic driver code for 440
kernel?

You shouldn't.

Regards,
--
Matt Porter
porter@cox.net
This is Linux Country. On a quiet night, you can hear Windows reboot.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/