[OT] Re: Why I can't bind the 1023 port?

On Tue, 2002-06-11 at 03:18, Daniel Lao wrote:

I recently met some trouble with the "rcp" command. My "rcp" could not work
even if I have correctly configure the remote host.
When I run rcp in my local host, it print "Permission deny" to the terminal.

So I re-compiled rcp and debugged it by GDB. I found that it fail while tried to
bind the 1023 port for connecting with the remote rshd.

I though the 1023 port might be protected, and I wrote a program as below:

<snip>

The running result was that I could not bind these ports: 1023, 1022, ...
but it was success in bind 1024 port.
And while I su to as the super-user, I could bind all these ports!
I am wondering if the ports were really protected, and how can I use the ports?

Should anyone be kind to give me some advise?
:)

ports < 1024 are reserved to the super-user. This is clearly very much
off topic btw.

Cheers

--
/Bastien Nocera
http://hadess.net

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/