Re: [PATCH] Hymod board support and related changes ...

On Tue, 28 May 2002 12:26:52 -0700, Tom Rini [off-list ref] writes:

On Tue, May 28, 2002 at 03:48:35PM +1000, Murray Jensen wrote:

quoted

Hymod board support and related changes ...

- Hymod board support
- 8260 fcc_enet: more flexible (or at least readable) approach to
  configuring i/o pins
- 8260 fcc_enet: support different PHY interrupt "vector"s for each FCC
- 8260 setup: fixed ppcboot jump address; should be 0x...110 not 0x...104
- 8260 setup: turn off interrupts before jumping to the boot rom

Can you split this up into logical patches?

OK

Also, instead of testing
TQM8260 || HYMOD for PPCBoot, why don't we just add in something like:
if [ "$CONFIG_TQM8260" = "y" -o  "$CONFIG_HYMOD" = "y" \
-o "$CONFIG_TQM8xx" = "y" ] ;then
  define_bool CONFIG_PPCBOOT y
fi

And use that.

Agreed. I will re-submit this patch. I will spend a bit of time on it, to see
if there are any other "generic" ppcboot configurations that could be rolled
into this. Cheers!
								Murray...


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/